640-802 CCNA Study Guide - Elktech.org

A. ip route 0.0.0.0 0.0.0.0 209.165.200.226
B. ip route 0.0.0.0 0.0.0.0 s0/0/0
C. ip route 192.168.1.0 255.255.255.0 209.165.100.250
D. ip route 209.165.200.0 255.255.255.0 192.168.1.250
Answer: B
Explanation:
In order to allow the network of 192.168.1.0/24 to access Serverl1, we need to establish a default
route. The format of this default route is as follows:
ip route prefix mask {ip-address interface-type interface-number [ip-address]} [distance] [name]
[permanent track number] [tag tag]
Based on the request of this subject, we need to configure the correct route as follows:
ip route 0.0.0.0 0.0.0.0 s0/0/0
Cisco 640-802 Exam
QUESTION NO: 363 CORRECT TEXT
Out of which port on switch Sw-Ac3 would a frame containing an IP packet with destination
address that is not on a local LAN be forwarded?
Answer: To forward any packet with destination address other then the subnet network of the
switch, the switch usually forwards this IP packets to the layer 3 device example router connected
to it.
Step1: Find the default-gateway(Router or layer 3 device) configured on the switch.
use the Show run command to view the IP address used to configure default-gateway on the
switch.
Step2: Look for the router VLAN-R1 after using the show cdp neighbor detail command
"Pass Any Exam. Any Time." - www.actualtests.com 266