GM-TTT - Alpermann+Velte
GM-TTT - Alpermann+Velte
GM-TTT - Alpermann+Velte
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Installation & Operation Manual <strong>GM</strong>-<strong>TTT</strong><br />
1.4 Connections at the Rear and Technical Data<br />
Page 13<br />
DSUB9F<br />
XLR4M XLR3M XLR3F<br />
DSUB9F<br />
DSUB9M<br />
2 x BNC<br />
2 x BNC<br />
1<br />
1<br />
1<br />
off 1<br />
MTD<br />
1 4<br />
2 3<br />
DC IN<br />
1 2<br />
3<br />
LTC OUT<br />
2 1<br />
3<br />
LTC IN<br />
1<br />
GPI<br />
REF.<br />
DATA IN<br />
2<br />
OPTION<br />
off<br />
75Ω<br />
2<br />
VIDEO/BB<br />
Dimensions: 214.5 (W) x 43.5 (H) x 140 (D) mm (½ 19“, 1U)<br />
Weight:<br />
1.5 kg approx.<br />
Operating temperature: 5 °C to 40 °C<br />
Relative humidity: 35% to 85%, non-condensing<br />
MTD<br />
LTC(MTD)/RS485 connector<br />
Specifications for LTC_x/LTC_y see LTC OUT<br />
Instead of LTC(MTD)/RS485<br />
signals: pinning in case of<br />
option “2“ (RS232) or<br />
option “4“ (RS422)<br />
Option “2“ (RS232):<br />
2: RxD (in) 5: GND<br />
3: TxD (out) 7: RTS (out)<br />
4: DTR (out) 8: CTS (in)<br />
1, 6, 9: not connected<br />
Pin 1: RS485 TRA (input/output)<br />
Pin 2: RS485 TRB (input/output)<br />
Pin 3: LTC_x (output)<br />
Pin 4: LTC_y (output)<br />
Pin 5: GND<br />
Pin 6-8: reserved<br />
Pin 9: DRVSEL<br />
Option “4“ (RS422):<br />
1, 5: n.c. 6: TxC<br />
2: TxB (out) 7: TxA (out)<br />
3: RxA (in) 8: RxB (in)<br />
4: RxC 9: frame<br />
DC IN<br />
Power Consumption:<br />
without additional options = 3 W; maximal = 8 W.<br />
Pin 1: V- (GND)<br />
Pins 2/3: not connected<br />
Pin 4: V+: 10 - 30 V DC (except with<br />
option “A”: 10 - 18 V DC)<br />
LTC OUT<br />
LTC_x/LTC_y: LTC signal, balanced.<br />
• Level: 35 mV pp - 3 V pp adjustable.<br />
• Impedance: 12 kΩ.<br />
• LTC input frequency: 1500 - 3000 bps<br />
=19 - 37 frames/s 80-bit code,<br />
= 14 - 26 frames/s 112-bit code.<br />
Pin 1: GND<br />
Pin 2: LTC_x (input)<br />
Pin 3: LTC_y (input)<br />
LTC input accepted for genlocking:<br />
frame rate = 24: 24 frames/s ±1.4%,<br />
frame rate = 25: 25 frames/s ±1.5%,<br />
frame rate = 30: 30 frames/s ±1.8%.