Consultation Draft - National Transport Commission

MINIMUM DIMENSION
100 mm
MINIMUM DIMENSION
100 mm
Model Amendment Regulations – Transport of Dangerous Goods by Road or Rail –
Package No. 2
Figure 6.3.1
Radius 6mm
Dimensions In millimetres
Chapter 6.5
6.5.2.1.1 (a) Amend the second sentence to read as follows: "This symbol must
not be used for any purpose other than certifying that a packaging, a
portable tank or a MEGC complies with the relevant requirements in
Chapter 6.1, 6.2, 6.3, 6.5, 6.6 or 6.7.".
6.5.2.2.2 Amend the symbols to read as follows:
... kg max
MINIMUM DIMENSION
100 mm
IBCs capable of being stacked
MINIMUM DIMENSION
100 mm
IBCs NOT capable of being
stacked
6.5.2.2.4 Amend to read as follows:
"6.5.2.2.4 The inner receptacle of composite IBCs
manufactured after 1 July 2015 must bear the markings indicated in
6.5.2.1.1 (b), (c), (d) where this date is that of the manufacture of the
plastics inner receptacle, (e) and (f). The UN packaging symbol
must not be applied. The marking must be applied in the sequence
shown in 6.5.2.1.1. It must be durable, legible and placed in a
138
CONSULTATION DRAFT