Installation Manual for SMX Modules - OEM Automatic AB
Installation Manual for SMX Modules - OEM Automatic AB
Installation Manual for SMX Modules - OEM Automatic AB
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Installation</strong> <strong>Manual</strong><br />
10.1.1 Single-pole switching HISIDE output without testing<br />
For the connection of multi-phase applications or <strong>for</strong> higher current demands external<br />
contactors may be used. For a single-pole connection without external test please bear in<br />
mind that the <strong>SMX</strong> module will not recognize bonding of one or several external contacts.<br />
The following circuitry is not suitable <strong>for</strong> safety applications!<br />
X21<br />
DO0_P<br />
DO0_M<br />
DO1_P<br />
DO1_M<br />
DI1<br />
DI2<br />
DI3<br />
DI4<br />
X14<br />
L+<br />
L-<br />
Fig.: Single-pole switching P-output.<br />
Not suitable <strong>for</strong> safety applications!<br />
HB-37350-810-01-10E-EN <strong>SMX</strong> installation manual.doc Page 38 of 38