Installation Manual for SMX Modules - OEM Automatic AB
Installation Manual for SMX Modules - OEM Automatic AB
Installation Manual for SMX Modules - OEM Automatic AB
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Installation</strong> <strong>Manual</strong><br />
11.3 LED display<br />
Colour Mode Description<br />
green<br />
yellow<br />
"flashing"<br />
"flashing"<br />
red "flashing" Alarm<br />
red "permanent" Fatal Error<br />
System OK, configuration<br />
validated<br />
System OK, configuration not yet<br />
validated<br />
Note:<br />
For all operating states except RUN the outputs are rendered passive by the firmware, i.e.<br />
safely switched off. In status RUN the state of the outputs depend on the implemented PLCprogram.<br />
HB-37350-810-01-10E-EN <strong>SMX</strong> installation manual.doc Page 50 of 50