Safe Limited Speed - OEM Automatic AB

Chapter 3
Installation and Wiring
Flying-lead Feedback Cable Pin-outs
Motors Using 2090-XXxFMP-Sxx Feedback Cable
MPL-Bxxx-M/-S, MPL-A5xxx-M/-S, and 1326AB-Bxxx-M2L/-S2L Motors
(1) Bayonet-style connector
Drive Side
MSR57P Relay Side
Motor Connector
Drive MF
1585J-M8RB-2M5 Cable
Pin (1)
Signal
Connector Pin
Pin Wire Color Signal
A Black Sine+ 1 —> 4 Blue A1+/SIN1+
B White/Black Sine- 2 —> 3 White/Blue A1-/SIN1-REF
C Red Cos+ 3 —> 8 Brown B1+/COS1+
D White/Red Cos- 4 —> 6 White/Brown B1-/COS1-REF
E Green Data+ 5 NC
F White/Green Data- 10 NC
K Gray EPWR_5V 14 NC
L White/Gray ECOM 6 —> 1 White/Orange GND
N Orange EPWR_9V 7 —> 2 Orange Vcc
R TS+ 11 NC
T S1 12 NC
U S2 13 NC
V S3 8 NC
5 Green NC
7 White/Green NC
9 (2) Bare
Shield (case)
(2) Make sure you ground the shield properly to the low profile connector along with the feedback cable. See the
diagram on page 52.
44 Publication 440R-UM004A-EN-P - December 2008