Industrial Computing Solutions Fan-less Computer NISE ... - Omtec

Chapter 4: BIOS Setup
SMBUS Controller
Enables or disables the SMBUS.
Restore On AC Power Loss
BIOS SETUP UTILITY
South Bridge Chipset Configuration
USB Functions
[10 USB Ports]
USB 2.0 Controller
[Enabled]
HDA Controller
[Enabled]
SMBUS Controller
[Enabled]
Restore on AC Power Loss
Power Type
[Power On]
[ATX]
Options
Power Off
PCIE Ports Configuration
Power On
PCIE Port 0
[Auto] Last State
PCIE Port 1
[Auto]
Chipset
Disabled
2 USB Ports
4 USB Ports
6 USB Ports
8 USB Ports
10 USB Ports
← → Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Power Type
Selects the type of power used.
PCIE Port 0 and PCIE port 1
Configures the PCIE ports.
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Power Off
Power On
Last State
When power returns after an AC power failure, the system’s
power is off. You must press the Power button to power-on
the system.
When power returns after an AC power failure, the system
will automatically power-on.
When power returns after an AC power failure, the system
will return to the state where you left off before power
failure occurs. If the system’s power is off when AC power
failure occurs, it will remain off when power returns. If the
system’s power is on when AC power failure occurs, the
system will power-on when power returns.
Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 65
NISE 2100, NISE 2100A, NISE 2110, NISE 2110A User Manual