Industrial Computing Solutions Fan-less Computer NISE ... - Omtec

Chapter 4: BIOS Setup
PCIPnP
This section is used to configure settings for PCI/PnP devices.
Main
Setting incorrect field values may cause the system to malfunction.
Advanced PCI/PnP Settings
BIOS SETUP UTILITY
Advanced Boot Chipset PCIPnP
WARNING: Setting wrong values in below sections
may cause system to malfunction.
Plug & Play O/S
[No]
PCI Latency Timer [64]
IRQ3
IRQ4
IRQ5
IRQ7
IRQ9
IRQ10
IRQ11
IRQ14
IRQ15
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
Security
Exit
NO: let the BIOS
configure all the
devices in the system.
YES: lets the
operating system
configure Plug and
Play (PnP) devices not
required for boot if
your system has a Plug
and Play operating
system.
← → Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
PCI Latency Timer
This feature is used to select the length of time each PCI device will control
the bus before another takes over. The larger the value, the longer
the PCI device can retain control of the bus. Since each access to the
bus comes with an initial delay before any transaction can be made, low
values for the PCI Latency Timer will reduce the effectiveness of the PCI
bandwidth while higher values will improve it.
IRQ3 to IRQ15
Available
Reserved
The specified IRQ is available for PCI/PnP devices.
The specified IRQ is reserved for Legacy ISA devices.
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Plug & Play O/S
Yes Configures Plug and Play (PnP) devices that are not required to boot in
a Plug and Play supported operating system.
No The BIOS configures all the devices in the system.
Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 66
NISE 2100, NISE 2100A, NISE 2110, NISE 2110A User Manual