4-CYCLE OVERHEAD VALVE ENGINES - Small Engine Discount

OIL SEAL DRIVER
OIL SEAL REMOVER
No. 670195D Tool Kit. Contains special tools
commonly used in servicing 2 and 4 cycle engines.
OIL SEAL PROTECTOR/INSTALLER
Consult the specification
chart or measure the shaft
diamteter to determine the
correct tool.
Use with:
No. 670260. 1-3/16" crankshaft bearing diameters.
No. 670261. 13/16" crankshaft bearing diameters.
No. 670262. 3/4" Crankshaft bearing diameters.
No. 670263. 5/8" extended camshaft.
No. 670264. 1/2" extended camshaft.
No. 670277. 35/64" 8-1/2:1 Aux. Shaft.
No. 670292. 1" crankshaft bearing diameters assy.
for recessed, raised, or flush seal position.
No. 670293. 7/8" crankshaft bearing diameters
assy.for recessed or flush seal position.
No. 670308. Adapter for raised or flush seal position,
used with 670309.
No. 670309. 1-3/8" crankshaft bearing diameters
protector, use with 670308.
No. 670310. 1-3/8" crankshaft bearing diameter for
recessed seal position.
No. 670330. 1-1/2" extended camshaft.
No. 670335. 1-1/8" crankshaft bearing diameters.
No. 670336. 1-1/8" crankshaft bearing diameter
recessed seal.
No. 670337. 1" to be used with 670265 and 670266
recessed and raised.
FLYWHEEL KNOCK-OFF TOOL
Consult the specification chart or measure the shaft
diamteter to determine the correct tool.
Use with:
No. 670287. 7/8" crankshaft bearing diameters.
No. 670288. 3/4" crankshaft bearing diameters.
No. 670289. 13/16" crankshaft bearing diameters.
No. 670290. 1" crankshaft bearing diameters.
No. 670312.1-3/8" crankshaft bearing diameters.
No. 670331.1.5" crankshaft bearing diameters.
VIBRATION TACHOMETER
No. 670156 Vibration tachometer.
TAPER GAP GAUGE
No. 670256 Taper Gap Gauge
VALVE LAPPING TOOL
†No. 670103 - Knock-off tool (right hand) (7/16").
†No. 670169 - Knock-off tool (right hand) (1/2").
†No. 670314 - Knock-off tool (right hand) (5/8").
†No. 670329 - Knock-off tool (right hand) (3/4").
No. 670154A Valve lapping tool.
90
Not For Resale
www.SmallEngineDiscount.com