Mitsubishi CityMulti Catalog - Salvex

PLFY-P-NCMU-E SPECIFICATIONS
Model Name PLFY-P08NCMU-E PLFY-P12NCMU-E PLFY-P15NCMU-E
Power Source
208 230V, 1-phase, 60Hz
Cooling Capacity Btu/h *1 8,000 12,000 15,000
Heating Capacity Btu/h *1 9,000 13,500 17,000
Power Consumption
Current
Cooling W 50 60
Heating W 50 60
Cooling A 0.23 0.28
Heating A 0.23 0.28
External Finish (Munsell No.) Grille: White (6.4Y 8.9/0.4)
Height Inches 8-3/16
Dimensions
Width Inches 22-7/16
Depth Inches 22-7/16
Net Weight *2 Unit/Panel Pounds 34/7 37/7
Heat Exchanger
Cross Fin (Aluminum Plate Fin and Copper Tube)
Type x Quantity Turbo Fan x 1
Fan
Airflow Rate *3 CFM 280-320-350 320-350-390
Motor Type
Single-phase Induction Motor
Motor Output kW 0.015 0.020
Air Filter
Polypropylene Honeycomb
Refrigerant Pipe Dimensions
Low Pressure (Flare) Inches 1/2
High Pressure (Flare) Inches 1/4
Condensate Lift Mechanism (Standard) Inches 19-11/16
Drain pipe Dimension (O.D.) Inches 1-1/4
Sound Pressure Levels (As Measured
in an Anechoic Room) *3
(Low-Mid-High) dB(A) 29-32-38 30-34-39 31-35-40
Note:
*1 Cooling / Heating capacity indicates the maximum value at operation under the following conditions:
Cooling: Indoor: 80˚F (27˚C) DB / 67˚F (19˚C) WB; Outdoor: 95˚F (35˚C) DB
Heating: Indoor: 70˚F (21˚C) DB; Outdoor: 47˚F (8˚C) DB / 43˚F (6˚C) WB
*2 Net weight is shown for unit / grille
*3 Airflow rate / sound pressure levels are at (Low-Mid-High).
INDOOR UNITS
Ventilation Air: Providing sufficient ventilation air is an important part of every building design. ASHRAE Standard 62 provides the minimum ventilation air requirements. Also check local codes.
Specifications are subject to change.
47