Mitsubishi CityMulti Catalog - Salvex

CITY MULTI ® CONTROLLERS
Wireless MA Remote Controller (PAR-FL32MA) and Receiver (PAR-FA32MA)
• Features user-friendly operation and monitoring
• Controls up to 16 indoor units in a single group
• User Function: Allows user to set:
- On/Off
- operation modes of Cool, Heat, Dry, Fan or
Auto (R2-Series only)
- set temperature from 57˚ F – 87˚ F, depending on
operation mode and indoor unit
- fan speed setting
- airflow direction
• Grouping: Can be used only in same group
with PAC-YT51 (Simple MA Remote Controller), PAR-21MAA
(Deluxe MA Remote Controller), and other PAR-FL32MA
(Wireless MA Remote Controllers)
• Addressing: No addressing required
• Wiring: Connects using two stranded, non-polar control
wires to TB15 connection terminal on the indoor unit.
Requires crossover wiring for grouping across indoor units
• Dimensions: Remote (2-5/16" x 3/4" x 5-1/4"),
Receiver (2-3/4" x 7/8" x 4-12/16")
(Receiver (PAR-FA32MA) not shown)
On/Off Controller (PAC-YT40ANRA)
• On/Off Control for up to 16 Groups (max. of 50
indoor units)
• Collective On/Off Button turns all units on/off; collective
LED displays if any units are on, off, or in error
• Individual On/Off Button for 16 groups of indoor units;
Turns individual group on/off; Individual LED displays if
any units in the group are on, off, or in error
• Diagnostics: Flashing LED indicates error.
Displays four-digit error code
• Addressing: Requires manual addressing using rotary dial
switch to the M-NET communication bus
(default address is 201)
• Wiring: Connects to TB7 connection terminal on outdoor
unit via PAC-SC50KUA power supply or connects to
TB3 connection terminal on outdoor unit
• Dimensions: 5-1/8" x 3/4" x 4-3/4"
• Recommended to be used in conjunction with
PAR-21MAA Deluxe MA Remote Controllers or
PAR-F27MEA ME Remote Controllers for temperature
and mode setting
• Expandability: External input signal can be used for batch
operation such as Emergency Stop, On/Off, or On/Off
plus prohibit of local remote controller operation, external
output signal for collective operation state or error state
Schedule Timer (PAC-YT34STA)
• Schedules up to 50 indoor units. Maximum number of
indoor units per one group is 16. Maximum number of
groups is 50
• Use only in conjunction with PAR-21MAA (Deluxe MA
Remote Controllers) or PAR-F27MEA (ME Remote
Controllers)
• Scheduling: Supports up to nine patterns with up to 16
operations per pattern; operations include On/Off, mode
selection (Cool, Heat), set temperature, and prohibition
of remote controller functions (On/Off, operation mode
change, and set temperature adjustment); patterns are
applied to each group of indoor units on a per-day basis;
minimum time interval is five minutes
• Diagnostics: Displays four-digit error code and
error unit address
• Addressing: Requires manual addressing using rotary dial
switch to the M-NET communication bus.
• Wiring: Connects to TB7 connection terminal on outdoor
unit with the PAC-SC50KUA power supply or connects
to TB3 connection terminal on outdoor unit
• Dimensions: 5-1/8" x 3/4" x 4-3/4"
• Expandability: Can be used in conjunction with AG-150
Centralized Controller, which has higher priority but
requires change in dip-switch setting. Can be used in
conjunction with external input/output signals
CONTROLS
73