XTreme EFIS - STRATOMASTER Instrumentation MGL Avionics

More documents

Recommendations

Info

XTreme-EFIS Operating Manual Page 10 3.2 EFIS Quick Select Menu System Press the rotary control when the EFIS screen is displayed to access the EFIS quick select menu. MARK WAYPOINT: Select this menu option to mark a waypoint. The latitude, longitude and altitude are automatically set based on the current location. Enter a short name and long name for the waypoint so you can easily identify it. Press save once you have finished editing and to save the waypoint to the waypoint.ewd file. START FLIGHT: Select this option to manually start/stop a flight. This menu option is only shown if the XTreme is setup to select the manual flight option under the “FLIGHT LOG” setup menu. The flight timer “F”, “FLIGHT” or “FLIGHT TIME” text will flash to indicate that a valid flight is in progress. REALIGN AHRS: If the following message appears then you have to realign the AHRS. This is due to excessive maneuvering or exceeding the maximum bank, pitch or yaw rates. Select this function to indicated to the instrument that you are flying straight and level and that gravity tracking may be accelerated to ensure rapid realignment of the horizon. LEVEL PITCH: You can level the pitch of the artificial horizon should your aircraft fly “nose up” or “nose down” due to trim. ALTITUDE BUG: Use the rotary control to adjust the altitude bug. Press the “ON/OFF” soft key to enable or disable the altitude bug icon.
XTreme-EFIS Operating Manual Page 11 HEADING BUG: Use the rotary control to adjust the heading bug. Press the “ON/OFF” soft key to enable or disable the heading bug. TIMER: Select this menu option to configure the timer. Use the rotary control to adjust the timers reset value. Press the “UP/DOWN” soft key to select whether the timer must count up or down, the “START/STOP” soft key to start or stop the timer and the “ON/OFF” soft key to enable or disable the timer. MIN/MAX: Select this menu option to display the maximum and minimum captured values. Press the “RESET” soft key to reset the min/max values to the current values. BACKLIGHT: Select this menu option to adjust the backlight brightness level. This may be desirable during low light flying conditions. Use the rotary control to adjust the brightness level. MENU: Select this menu option to enter the main menu system.
Page 1 and 2: XTreme - EFIS Electronic Flight Inf
Page 3 and 4: XTreme-EFIS Operating Manual Page 3
Page 9: XTreme-EFIS Operating Manual Page 9
Page 61 and 62:
XTreme-EFIS Operating Manual Page 6
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
show all

XTreme EFIS - STRATOMASTER Instrumentation MGL Avionics

Create successful ePaper yourself

Delete template?

Save as template?