Basic Information Selection Guide M451-110, August 2002 - Rexnord

More documents

Recommendations

Info

F A L K Coupling Application Data Sheet Company Date Address Phone Fax Response Req’d By Submitted By COUPLING DESIGN: Disc Grid Gear Elastomer Horizontally Mounted Vertically Mounted COUPLING TYPE: Close Coupled Spacer Other SECTION I — PRIME MOVER: Type: Electric Motor Rating (hp, kW) Engine (No. of Cyl.) Diesel Gasoline Gas Base Speed (rpm) Turbine Steam Air Gas Maximum Speed (rpm) SECTION II — APPLICATION DATA Description Duty Cycle: Continuous Intermittent Load Characteristics: Unidirectional Reversing Smooth Light Shock Heavy Shock Little Vibration Med. Vibration Hvy. Vibration Environmental Concerns (Temperature, Moisture, Dust, Corrosive Materials) SECTION III — COUPLING SELECTION DATA hp/bhp/kW Torque Coupling Speed rpm Distance Between Shaft Ends or Shaft Gap Driver Shaft Diameter Key Fit: Clearance Interference Other Driven Shaft Diameter Key Design Requirements: Balance Class Weight WR 2 Stiffness Misalignment: Angular Axial Offset SKETCH AREA Fit: Clearance Interference Other Specifications Applicable: API-610 API-671 Others Service Factor: AGMA Recommended Other Competitive Data: Make Size & Type Bores Price & Additional Comments: The Falk Corporation, 1998, 2002. (M451-110) 58
This Page Intentionally Left Blank The Falk Corporation, 1998, 2002. (M451-110) 59
Page 1 and 2:
Selection Guide M451-110, August 20
Page 3 and 4: Lifelign Gear Coupling Types With t
Page 5 and 6: Type G70 Disconnect couplings are u
Page 7 and 8: How to Select Formula Selection Met
Page 9 and 10: SERVICE FACTORS: are a guide, based
Page 11 and 12: Type GC05 Continuous Sleeve Single
Page 13 and 14: Type G20 Standard Flanged Sleeve Do
Page 15 and 16: Type G52 Standard Flanged Sleeve Si
Page 17 and 18: Type G52 Standard Flanged Sleeve Fl
Page 19 and 20: Type GV52 Standard Flanged Sleeve V
Page 21 and 22: Types G62/G66 Standard Flanged Slee
Page 23 and 24: Type GL52 Standard Flanged Sleeve S
Page 25 and 26: Type G72 Disconnect/Dimensions —
Page 27 and 28: Type G82 Standard Flanged Sleeve Ri
Page 29 and 30: Type GR20 Standard Flanged Sleeve S
Page 31 and 32: Engineering Data — Standard Flang
Page 37 and 38: Type G52 Large Flanged Sleeve Singl
Page 39 and 40: Type GV20 Large Flanged Sleeve Vert
Page 41 and 42: Type GL20-4 Large Flanged Sleeve Sl
Page 43 and 44: Type G82 Large Flanged Sleeve Rigid
Page 45 and 46: Engineering Data — Large Flanged
Page 51 and 52: Engineering Data — All Gear Coupl
Page 53: Interchange Guide — Continuous Sl
show all

Basic Information Selection Guide M451-110, August 2002 - Rexnord

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?