Spectra 2K User Guide - Spectra Logic
Spectra 2K User Guide - Spectra Logic
Spectra 2K User Guide - Spectra Logic
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 5. Using the AIT Tape Drives<br />
Manual Drive Head Cleaning Operation<br />
To clean your AIT tape drives, follow these steps:<br />
Note:<br />
Use only Sony SDX-TCL cleaning cartridges.<br />
1. Power on the library.<br />
2. Open and close the library door.<br />
Before the picker completes its calibration routine, it pauses in front of the DCM<br />
and the LED shines green.<br />
3. Open the door of the library while the picker is parked in front of the DCM.<br />
4. Carefully insert the cleaning tape into the drive with the window facing the top<br />
of the drive.<br />
The cleaning tape performs automatic cleaning and ejects the cartridge when<br />
complete.<br />
Caution: Do not use the cleaning cartridge for more than the number of<br />
specified cleaning cycles indicated on the cartridge label. Mark<br />
the cleaning cartridge each time you use it or use backup<br />
software to track cleaning cartridge usage.<br />
47
Change language