Spectra 2K User Guide - Spectra Logic
Spectra 2K User Guide - Spectra Logic
Spectra 2K User Guide - Spectra Logic
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
1 Introduction<br />
About TreeFrog ® Architecture<br />
The <strong>Spectra</strong> <strong>2K</strong> library uses TreeFrog architecture for robotic tape libraries developed<br />
by <strong>Spectra</strong> <strong>Logic</strong>. TreeFrog architecture can be configured with 15 or 30 cartridge slots<br />
and one or two tape drives. In addition, TreeFrog architecture supports SCSI-2<br />
interfaces—both low-voltage differential/single-ended (LVD/SE) and differential. The<br />
cornerstones of TreeFrog architecture are the integrated robotic picker and the<br />
uni-body robotic chassis.<br />
About This <strong>Guide</strong><br />
This guide is intended to be read by the owners of the <strong>Spectra</strong> <strong>2K</strong> library. It covers the<br />
installation and operation of the library, as well as troubleshooting information. For the<br />
latest up-to-date information please go to www.spectralogic.com, and view the latest<br />
<strong>Spectra</strong> <strong>2K</strong> Library <strong>User</strong> <strong>Guide</strong>. Also available are these related publications:<br />
Related Publications<br />
• <strong>Spectra</strong> <strong>2K</strong> Library Release Notes provides last-minute information about the <strong>Spectra</strong><br />
<strong>2K</strong> library.<br />
• <strong>Spectra</strong> <strong>2K</strong> Library Developer <strong>Guide</strong> provides SCSI reference material and other<br />
references useful to application developers.<br />
Getting Started<br />
If your library is already installed and configured, begin with Chapter 4 Using the<br />
Library. To install and configure the library from the beginning, read all of the<br />
chapters of this guide in sequence.<br />
9
Change language