Serial I/O - ICSDataCom

Turn your PC into a professional DAQ lab. The ideal solution for process control, D&E, test:
ME-2600i/2000i MEsslabor/DAQlab software, virtual instrument panels (Agilent VEE
runtime)
Model Overview:
ME-2600i, ME-2000, ME-300, ME-260
A/D 1) D/A Digital I/O Model Bus
12 bit/300 kHz 12 bit, 4 channels 2) 32 ME-2600i PCI PCI
12 bit/300 kHz - 32 ME-2000i PCI PCI
12 bit/300 kHz 12 bit, 4 channels 2) 32 ME-2600 cPCI CompactPCI/PXI
12 bit/300 kHz - 32 ME-2000 cPCI CompactPCI/PCI
12 bit/200 kHz 12 bit, 4channels 24 ME-300 ISA ISA 3)
12 bit/200 kHz - 24 ME-260D ISA ISA 3)
12 bit/200 kHz - - ME-260 ISA ISA 3)
1) A/D section opto-isolated from rest of board. 16 single-ended/8 differential channels.
2) With sense lines.
3) Classic” ISA models available while supplies last. After that, boards can be ordered in
larger quantities only for support of running applications. Reduced driver software..
Specifications:
ME-2600i, ME-2000i
Analog inputs
Number 16 single-ended/8 differental channels
Range, gain Programmable unipolar (single-ended) or bipolar (single-ended/differential):
x1: 0…10 V ±10 V x2: 0…5 V ±5 V
x4: 0…2.5 V ±2.5 V x8: 0…1.25 V ±1.25 V
Isolation Galvanic isolation of A/D the section from PC GND and from the rest
of the board up to 500 V. Inputs protected up to ±15 V
A/D converter 12 bit, sampling rate max. 333 kHz
Trigger
Internal (A/D timing counter), external TTL trigger
Operating modes Single value; block of values; conversion with programmable channel
list (max. 1024 entries: Channel number, gain, uni-/bipolar, singleended/differential);
2 k FIFO for A/D data
Analoge outputs (ME-2600i only)
Number 4 independent channels with 1 sense line per channel (automatic
stabilisation of the output voltage depending on the load)
Ranges 0…10 V, ±5 V, ±10 V programmable for each channel individually. Output
current max. 2 mA per channel
D/A converter Quad 12 bit D/A converter
Sampling rate Max. 100 kHz (at ±10 V; this is the max. value of the D/A converters;
actual rate depending on system). Operating modes: Single value
(buffered/transparent) or simultaneous output (buffered)
Digital I/O (TTL)
Number 32 I/O channels (2x 16 bit independent ports as inputs or outputs)
Level
Outputs: Low max. 0.5 V/24 mA; high min. 2 V/-15 mA; inputs: Low
max. 0.8 V; high min. 2 V
General
Bus interface 32 bit/33 MHz StandardPCI bus or CompactPCI/PXI bus. PCI Local
Bus 2.1 compatible
Size (mm) PCI: ~174 x 98; CompactPCI: 160 x 100 (3 U)
Connectors 78-pin D-sub female
Meilhaus Electronic Data Acquisition Boards
Software:
Including: ME-Power-CD with…
Drivers for Windows 98/Me, NT, 2000, XP.
Supports Visual C++, Delphi, Visual Basic and
Borland C/C Builder.
Driver for Agilent VEE und LabVIEW.
Support software for Linux (source code
under GPL)
Drivers for QNX (source code under QNX
Community License)
Drivers for VxWorks 5.4.2.
Utilities, examples, demos.
“Soft manuals” English and German, for Acrobat
Reader (printed manuals as an option/extra
charge)
Ordering Code:
ME-2000i PCI 875.00 $
PCI A/D board: Isolated 12 bit/333 kHz A/D, digital
I/O
ME-2600i PCI 1085.00 $
PCI multi I/O board: Isolated 12 bit/ 333 kHz A/D.
12 bit D/A. digital I/O
ME-2000i cPCI 1145.00 $
ME-2600i cPCI 1295.00 $
See above, but for CompactPCI/PXI platform
Web: www.meilhaus.com/e_me
Starter-Kits:
ME-SK2
on request
PCI MEsslabor/DAQlab with ME-2000i, support
software, cable ME AK-D78/1, terminal block ME
AB-D78M
ME-SK2 BNC
See ME-SK2, but with BNC box ME AB-BNC16
instead of cable + terminal
ME-SK2 MUX
on request
on request
47 channel DAQ system with: DAQ board ME-2000i
PCI, 32-to-1 multiplexer extender board ME-
MUX32M and cable ME AK-D78/1
ME-SK4
ME-SK4 BNC
ME-SK4 MUX
on request
on request
on request
See above, but with ME-2600i instead of ME-2000i
Web: www.meilhaus.com/e_me
Accessories:
Cable ME AK-D78/1 (1 m) 92.00 $
78-pin D-sub male and 78-pin D-sub female (1:1),
connects ME-2000i/ME-2600i to terminal block,
ME-MultiSig® boards or user application
Terminal block ME AB-D78M 145.00 $
78-pin D-sub male and spring terminals
Terminal block ME AB-BNC16 185.00 $
78-pin D-sub male and16 BNC.
ME-MultiSig® series
Multiplexing, demultiplexing and signal-conditioning
system
Web: www.meilhaus.com/e_me
13