Serial I/O - ICSDataCom

Relay & I/O
Switch High Loads, Monitor Digital Statuses:
34/26-Channel Relay and TTL/Opto Input Board ■ ME-630
■ Relays:
• 16 or 8 relays type C (change over).
• For current up to 2 A/30 V (short time current for
single relay up to 3.5 A).
• Models with small signal relays.
• Status check.
• Relay statuses can be checked with read-back.
Terminal block and cable
■ Digital I/O:
18 additional digital-inputs:
• 8 TTL digital inputs.
• 8 opto-isolated inputs (24 V level).
• 2 interrupt inputs (TTL level).
■ PCI bus Interface:
• PCI Local Bus 2.1 compatible.
• Fully compatible CompactPCI/PXI versions available.
• Plug’n’Play.
Relay type C/change over
16-Channel Reed-Relay and TTL Digital Input Board: ME-63
“Classic” ISA models available while supplies
last. After that, boards can be ordered in larger
quantities only for support of running applica-
■ Relays:
• 16 reed-relays (single pole, normally
open). Isolation 10 GΩ (open contact).
• Max. contact data: 100 V, 0.5 A, power
10 W/VA.
• Switching time less than 0.5 ms.
• One red status LED per channel.
■ Digital I/O:
• 4 TTL digital inputs.
■ ISA Bus Interface:
• ISA-8 bit.
• Jumper for addresses.
Ordering Code:
ME-63 ISA 350.00 $
ISA 16 reed relay board, 4 TTL inputs
Cable ME AK-D37 (2 m) 65.00 $
37-pin D-sub male-female; 1:1
Terminal block ME AB-D37M 90.00 $
37-pin D-sub male and spring terminals
Driver software for Windows 95, 98, NT
20
Meilhaus Electronic Data Acquisition Boards