Serial I/O - ICSDataCom

Acquisition
Analog and Relay Output Modules
RS485 Data Acquisition and Control Modules ■ I-7000 Series
■ The I-7024 provides 4 analog outputs that can provide ±10 V, ±5 V,
5 V, 10 V, 4 to 20 mA or 0 to 20 mA. Power on settings can be stored
in the module’s internal EEPROM.
■ The I-7060 provides four isolated digital inputs and four relay outputs.
The digital inputs have a wide range of voltage inputs.
• Logic 0 is 0 to +1 V. Logic 1 is + 3.5 to +30 V.
• Digital input #4 can be used as a 16 bit counter with rates up to
100 kHz.
• The four sets of relay contacts are two SPST (Form A) contacts
and two SPDT (Form C) contacts. Contact ratings are a rugged
2 A at 30 VDC and 0.5 A at 115 VAC.
• The I-7060D version adds four LEDs which show which relays are
energized.
■ Screw terminals for easy wire connection
Ordering Code
I-7024 335.00 $
RS485 Analog Output Module with 4 analog outputs.
Includes single DIN rail and manual on CD-ROM.
I-7060 140.00 $
RS485 Relay Module with 4 relay contacts and 4
digital inputs. Includes single DIN rail and manual on
CD-ROM.
I-7060D 150.00 $
This version adds four LEDs which show which relays
are energized
Web: www.icsdatacom.com
Specifications:
I-7000 DAQ Series
Interface
RS485 input TX and RX pair, half duplex
Data rate Up to 115.2 kbaud
Transmission Data bits: 7 or 8. Parity: None, odd or even. Stop bits: 1 or 2
Distance 1200 m
Data Acquisition
I-7024 outputs 4 current or voltage outputs
Ranges 0 - 20 mA, 4 - 20 mA, 5 V, 10 V, and ±10 V
Resolution 14 bit
Accuracy ±0.1% FSR, zero drift ±0.153 µV/°C, ±0.2 µA/°C
I-7060 relays 4 (2 SPST, 2 SPDT)
Contact ratings 125 VAC @ 0.6 A, 250 VAC @ 0.3 A, 30 VDC @ 2 A
I-7060 inputs 4 high level digital inputs
Logic levels: Logic 0 = 0 to 1 VDC, logic 1 = +3.5 to 30 VDC
General
Temperature -25 to 75°C operating, -40 to +85°C storage
Size
123 mm x 72mm x 33 mm without bracket
63