Serial I/O - ICSDataCom

Logger
Mobile, Battery Powered Longtime DAQ and Logging
Temperature/rel. Humidity Measurement ■ MEgicDisk®
■ Mini DAQ modules with a temperature or a “climate” sensor (= combination
of temperature + relative humidity/r. H.).
■ Data recording and storage functionality (data logger).
■ Small, light, mobile, battery powered.
■ Data transfer via infra red/IrDA to a PC or notebook.
■ Easy to use software MEgicSoft for Windows and Linux is included,
featuring an ASCII data export function for Excel.
■ How to Measure - Fast Results in 4 Easy Steps:
∂ Confi gure the MEgicDisk® and get it “ready to go” with a few mouse clicks.
∑ Place the MEgicDisk® in the required measurement position.
∏ The MEgicDisk® automatically takes measurements over the programmed
period of time.
π Read the measured values into your PC. Directly display data or export
data to Excel.
Applications:
• Transport: Food, chemicals,
pharma, containers, plants,
animals. Insurances. Scientifi c
experiments/space…
• Stationary: Greenhouses, stables,
buildings, (cold) storage
rooms, wine cellars, warehouses.
Inside temperatures of
devices, servers, racks…
Ordering Code:
MEgicDisk® TEMP
on request
Mini DAQ and logger module with temperature sen-
sor, including battery and CD-ROM with documentation
and MEgicSoft Win and Linux 1)
MEgicDisk® TEMP-P
on request
Mini board/OEM version without housing 1)
MEgicDisk® CLIMA
on request
Mini DAQ and logger module with “climate“ sensor
(temperature + relative humidity), including battery
and CD-ROM with documentation and MEgicSoft Win
and Linux 1)
MEgicDisk® CLIMA-P
on request
Mini board/OEM version without housing 1)
5 Pack and 10 Pack on request
Bundle with 5 or 10 MEgicDisks® of one type 1)
Cell Battery
on request
Accessory for all models. Special battery for models
-P as an option on request, extended lifetime
IrDA 1) on request
Infra red interface for PC/notebook, plugs on serial
PC COM port
USB-to-COM
on request
USB to serial converter. This allows the external IrDA
to be used via a standard USB port
Starter-Kits
on request
Bundles with MEgicDisk® and IrDA, various versions
Web: www.meilhaus.com/megic
Specifications:
MEgicDisk®
Data acquisition and logging
Models
TEMP: Measurement of temperature.
CLIMA: Measurement of temperature and relative humidity
Range, accuracy Temperature -10…+70°C/±1°C (TEMP, CLIMA),
2…99%/±3.5% relative humidity (CLIMA)
Sampling Measurement intervall 1 s or more, in steps of 1 s
Memory depth 3500 values for longtime recording/logging
Trigger
Start immediately, start with upper/lower threshold for temperature
(TEMP) or r. H. (TEMP, CLIMA), start with time delay (set date,
time, incl. timing synchronisation with PC clock)
Data transfer Infra red (IrDA). IrDA via COM required 1)
General
Housing Cylinder-shaped. Plastic Polycarbonat. Suitable for food. Water
resistant. Mounted with 4 screws and a sealing ring.
Size
13 mm high, 33,6 mm diameter.
Option -P: Mini board without housing
Temperature Operating temperature, see measurement range: -10…+70°C
Battery Type CR 2032 with soldering lugs, Li/MnO2, 3 V/235 mAh. Lifetime,
standby with max. Live Signal Intervall: ~130 days. Lifetime
worst case with Live Signal Intervall 3 s and measurements/logging
every 1 s incl. data transmission via IrDA: ~2 weeks. For option -P
(mini board version) another type of battery with an extended lifetime
can also be used
Software MEgicSoft for Windows or Linux included on CD-ROM:
1) Please note: To setup and start a data acquisition process and to read the measured
values, a notebook or PC with an external infra red port is required. The MEgicDisks®
do not function with the infra red ports available on most Notebooks.
45