Serial I/O - ICSDataCom
Serial I/O - ICSDataCom
Serial I/O - ICSDataCom
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
How to connect the ME-UB series:<br />
* ME has ready-to-use special cables (available as accessories) to connect the<br />
ME-UB series to the PCI plug-in boards ME-1400 (ME-1400 only, not for versions<br />
A, B, C, D) and the ME-FoXX (ME-46xx) series.<br />
* Die ME-UB boxes can also be connected to many other TTL digital I/O boards<br />
using individual custom-specifi c/board-specifi c cables.<br />
ME-FoXX Series<br />
8 bit port C<br />
20-pin connector<br />
on board ME AK-D25F/S<br />
ME AK-D2515/4000<br />
8 bit port D<br />
ME-FoXX® series/ME-46xx:<br />
16 bit/500 kHz multi I/O board<br />
with TTL digital I/Os, PCI.<br />
Connecting the ME-UB serie to the<br />
ME-FoXX®/ME-46xx<br />
• Use the TTL digital ports C and D (on-board pin<br />
connector) on the ME-FoXX® boards to connect<br />
the ME-UB boxes. The cable ME AK-D25F/S<br />
included with the ME-FoXX® has to be plugged<br />
on the pin connector.<br />
• Use the cable ME AK-D2515/4000 to connect<br />
up to 2x ME-UB directly to the additional slot<br />
bracket of the ME-FoXX.<br />
• If you also want to use a port with TTL signals,<br />
just replace one ME-UB box with a terminal block<br />
ME AB-D15F or ME-UB<br />
ME-1400<br />
ME AK-D7815/1400<br />
ME-FoXX® series/ME-46xx:<br />
16 bit/500 kHz multi I/O board<br />
with TTL digital I/Os, PCI.<br />
Connectingh the ME-UB series to a<br />
ME-1400<br />
• Use a cable ME AK-D7815/1400 and connect<br />
up to 3x ME-UB directly to the ME-1400.<br />
• If you also want to use one or two ports with TTL<br />
signals, just replace one or two ME-UB boxes<br />
with terminal blocks ME AB-D15F.<br />
8 bit Port A:<br />
E/A 0…7<br />
8 bit Port B:<br />
E/A 8…15<br />
8 bit Port C:<br />
E/A 16…23<br />
Split cable<br />
ME AK-DUB<br />
ME-UB series<br />
15-pin/8 channels<br />
ME-UB15<br />
ME-UB37<br />
Connectingh the ME-UB series to a<br />
USB mini DAQ lab<br />
• Use with USB lab PMD-1008 or LabJack U12.<br />
• Tripple or double split cable ME AK-DUB or<br />
ME AK-DUB/LJ available as accessories.<br />
Mini USB DAQ lab<br />
ME AK-DUB<br />
Low power connector<br />
(power supply)<br />
ME AK-DUB/LJ<br />
Accessories:<br />
Additional Accessories for mini USB DAQ labs:<br />
Terminal ME-UB15<br />
on request<br />
15 spring terminals<br />
Terminal ME-UB37<br />
37 spring terminals<br />
Cable ME AK-DUB<br />
on request<br />
on request<br />
Triple split cable, 37-pin D-sub female and 3x 15-pin<br />
D-sub male + low power connector. For PMD-1008<br />
Cable ME AK-D37 65.00 $<br />
37-pin D-sub male-female, 1:1, for PMD-1008<br />
Cable ME AK-DUB/LJ<br />
on request<br />
Double split cable, 25-pin D-sub male and 2x 15-pin<br />
D-sub male + low power connector. For LabJack U12<br />
Meilhaus Electronic Data Acquisition Boards<br />
37
Change language