Serial I/O - ICSDataCom

Serial I/O
Low Profile Serial and LPT PCI board:
Low Profile RS232 and LPT Board ■ ME-9200
■ Serial I/O:
• 2 RS232 ports.
• Transmission rates up to 460.8 kbit/s.
• Port COM 2 with fl at ribbon cable and additional
slot bracket or together with COM 1 on a standard
PCI slot bracket.
■ Parallel
• 1 parallel standard LPT Port.
• Flat ribbon cable and additional slot bracket.
■ PCI bus Interface:
• PCI Local Bus 2.1 compatible. Plug’n’Play.
• Low profi le size 120 mm x 57 mm.
• Will fi t into small desktop PCs, terminals or thin
clients.
Software:
Including: ME-Power-CD with…
Installation notes for Windows (98/Me, NT,
2000, XP), Linux and QNX.
Runs as standard COM port with Agilent
VEE and LabVIEW and others
Drivers for QNX (source code under QNX
Community License)
Ordering Code:
ME-9200 RS232 PCI LP 159.00 $
PCI interface board with 2 RS232 ports and 1 LPT
port. Rates up to 460.8 kbit/s. Incl. set of fl at ribbon
cables for COM 2 and LPT as well as all slot brackets
needed for use in low profi le or standard PCI PCs
Web: www.meilhaus.com/e_me
Specifications:
ME-9200
Data transmission
Interfaces RS232 with handshakes
Ports 2
Baud rates Up to 460.8 kbit/s
Format Data bits: 5…8. Parity: No, even, odd. Stop bits: 1 or 2
UART type Compatible with 16550
FIFO
1 transmit and receive FIFO each, with 16 Byte
Parallel port
Number 1 Standard LPT port
General
Bus interface 32 bit StandardPCI bus. PCI Local Bus 2.1 compatible
Size (mm) Low profi le 120 x 57 (without slot bracket).
Connectors 9-pin D-sub male for COM 1, 10-pin fl at ribbon cable connector for
COM 2 (incl. cable with 9-pin D-sub male), 25-pin fl at ribbon cable
connector for LPT (incl. cable with 25-pin D-sub female).
Meilhaus Electronic Data COM Boards
51