Serial I/O - ICSDataCom

More documents

Recommendations

Info

Multi-I/O Highend DAQ Board with Sophisticated Features: 16 bit/500 kHz Isolated Multi I/O Board ■ ME-4680, i, is Terminal block and cable ■ Analog Inputs: • 32 single-ended/16 differential inputs. Model “is”: 8 of the inputs also with simultaneous sampling (single-ended) plus 24 standard single-ended inputs. • 16 bit/500 kHz A/D conversion. Models “i”/“is”: A/D section opto-isolated. • External analog and digital trigger. ME-MultiSig® system: ME-MUC32M + S and plug-on ■ Analog Outputs: • 4 output channels. • 16 bit/500 kHz D/A conversion. Models “i”/“is”: D/A section opto-isolated. • External digital trigger. • Waveform output: FIFO for each channel. ■ Digital I/O and Counters: • 4x 8 digital I/O channels. • Depending on model/port: TTL or opto-isolated. • Timercontrolled bitpattern output using D/A FIFO. • 3x 16 bit counters • Models “i”/“is”: Channels opto-isolated ME-63Xtend series ■ PCI-Bus Interface: • PCI Local Bus 2.1 compatible. • Plug’n’Play. ME-UB series 6 ■ Expandability: • ME-MUX32: More analog inputs in multiplexing technology. Timer controlled acquisition. • ME-SIG32: Flexible signal conditioning with plug-on modules. • ME-DEMUX32: More analog outputs in demultiplexing technology. • ME-63Xtend: Expand digital I/O ports with opto-isolation or relays. • ME-UB: Expand digital I/O ports with opto-isolation or relays. Meilhaus Electronic Data Acquisition Boards
+10V -10V Specifications: Analog inputs Number Ranges FIFO Isolation A/D conversion Trigger Analog outputs Number Range Isolation D/A conversion FIFO Trigger Digital I/O Number Level AD_TRIG_A- AD_TRIG_A+ ExATrig Analog Trigger Technology In trigger mode an A/D conversion is started only if a rising (“RISING”), falling (“FALLING”) or a rising or a falling edge (“BOTH”) occurs. The analog A/D trigger makes use of a comparator which compares the positive trigger input (AD_TRIG+, dynamic signale up to 500 kHz, ±10 V) and the negative trigger input (AD_TRIG, threshold). “Rising edge” means that the threshold value is exceeded from negative to positive. “Falling edge” means that AD_TRIG_A+ is falling below the threshold value from positive to negative. Extras Counters Number Level Lines General Bus interface Settings Size (mm) Connectors ME-SylverFoXX: The new Flexibility in Measurement Data Acquisition The ME-SylverFoXX (ME-4680, i, is) is the highend model of the ME-FoXX®® family. It has a variety of innovative features many users have been look- ing for: The most important feature is the complete opto-isolation of all analog inputs, outputs, counter lines as well as 2 digital I/O ports on the versions “i” and “is”. Are analog inputs with simultaneous sampling re- quired? The ME-4680is has 8 of them. The analog outputs have FIFOs which can be used for waveform generator applications. The digital outputs can be programmed for bit pattern output under timer control (with FIFOs). The trigger section, with its digital and analog trigger lines, is another innovative highlight worth taking a closer look (see text and picture on the right). ME-4670i and ME-4680, i, is 32 single-ended or 16 differential; ME-4680is: 8 of the inputs can also be used as single-ended channels with simultaneous sampling/ Sample&Hold plus 24 “normal” single-ended channels ±10 V, ±2.5 V, 0...10 V, 0...2.5 V 1 k FIFO (1024 values) for conversion with channel list Models “i” and “is”: Up to 500 V (opto-coupler chip specifi cation) 16 bit/500 kHz External digital trigger, external analog trigger (both on rising, falling or both edges) 4 channels ±10 V Models “i” and “is”: Up to 500 V (opto-coupler chip specifi cation) 16 bit/500 kHz All ME-4680 versions: 4 k per channel External digital trigger (rising, falling edge) Models “i” and “is”: 8 opto inputs, 8 opto outputs and 2x 8 bit TTL I/O ports, each port as input or output. Model ME-4680: 4x 8 bit TTL I/O ports, each port as input or output Depending on port: TTL level or opto-isolated (standard: 5 V level, optional: Up to 48 V. Outputs open-collector) Bitpattern generator timercontrolled with FIFO 3 independent 16 bit, type 8254 compatible TTL. Models “i” and “is” opto-isolated (standard: 5 V level, optional: Up to 48 V. Outputs open-collector) All lines (Clock, Gate, Out) of all counters available at the connector 32 bit/33 MHz PCI Local Bus 2.1 compatible Via software; Windows Plug’n’Play 175 x 107 (without slot bracket/connector 78-pin D-sub female, pin fi eld connector on board (2x 8 bit TTL digital I/O ports). A fl at ribbon cable with a 25-pin D-sub female and an additional slot bracket is included; uses another PC slot Meilhaus Electronic Data Acquisition Boards Software: Including: ME-Power-CD with… Drivers for Windows 98, Me, NT, 2000, XP. Supports Visual C++, Delphi, Visual Basic and Borland C/C Builder Driver for Agilent VEE and LabVIEW Support software for Linux (source code under GPL) Utilities, examples, demos “Soft manuals” English and German, for Acrobat Reader (printed manuals as an option/extra charge) Ordering Code: ME-4680is 2925.00 $ PCI multi I/O board: 16 bit/500 kHz isolated A/D, channels: 32 se. or 16 diff. or 8 se. with simultaneous sampling + 24 “normal” se., 4 isolated 16 bit analog- outputs with FIFOs, 8/8 optoI/Os, 2x 8 TTL digital I/Os, 3x 16 bit isol. counters ME-4680i on request see ME-4680is, but 32 se. or 16 diff. channels (no simultaneous sampling) ME-4680 2269.00 $ see ME-4680i, but without opto-isolation Web: www.meilhaus.com/e_me Accessories: Cable ME AK-D78/1 (1 m) 92.00 $ Cable ME AK-D78 (2 m) 95.00 $ 78-pin D-sub male and 78-pin D-sub female (1:1), connects ME-FoXX® to terminal block, ME-MultiSig® boards or user application Terminal block ME AB-D78M 145.00 $ 78-pin D-sub male and spring terminals Cable ME AK-D25F/S on request 20-pin ribbon cable connector and 25-pin D-sub female, for digital I/O ports C/D. 1 cable is included Cable ME AK-D2578/4000 on request 25-pin D-sub male and 78-pin d-sub female, connects ME-FoXX®® to 1x ME-63Xtend Cable ME AK-D2515/4000 on request 25-pin D-sub male and 2x 15-pin D-sub male, connects ME-FoXX®® to 2x ME-UB ME-63Xtend and ME-UB series External expansion boards/boxes with relays or opto-isolation ME-MultiSig® series quote quote Multiplexing, demultiplexing and signal-conditioning system ME-AA4-3(i) series quote Connectivity adaptor, connects exisiting ME-2x00i/ ME-3000 applications to ME-FoXX®® boards. Connects ME-4680i/is to ME-MUX32 with full opto-isolation and functionality Web: www.meilhaus.com/e_me 7
Page 1 and 2: Reliable DAQ and Interface Products
Page 3 and 4: Overview Reliable DAQ, Control and
Page 5: Serial Interface Boards Contents RS
Page 9 and 10: ME-FoXX® - Get the MaXXimum DAQ po
Page 11 and 12: DAQ System iMEssbox 4600 Profession
Page 13 and 14: Turn your PC into a professional DA
Page 15 and 16: 312 mm (without slot bracket/connec
Page 17 and 18: Picture above, left: Opto-isolated
Page 19 and 20: Selection Chart for Analog Output B
Page 21 and 22: ME-630 ME AK-D78/1 ME AB-D78M Other
Page 23 and 24: Model Overview: ME-8100, ME-81, ME-
Page 25 and 26: ME-94 cPCI and PCI ME-95 cPCI and P
Page 27 and 28: ME-1400(A) ME AK-D25 ME AB-D25M 8 b
Page 29 and 30: ME-1000/64 + ME-1001 = ME-1000/128
Page 31 and 32: ME AB-D78M ME AB-D50M ME AB-D37M ME
Page 33 and 34: Accessories Reliable and Clear Conn
Page 35 and 36: Ordering Code: ME-63Xtend Series Ex
Page 37 and 38: How to connect the ME-UB series: *
Page 39 and 40: DAQ board ME-SIG32 inputs DAQ board
Page 41 and 42: Terminals for signal lines Bridge m
Page 43 and 44: Accessories 32 Analog Outputs in Mu
Page 45 and 46: Logger Mobile, Battery Powered Long
Page 47 and 48: Standard Model Overview: ME-9000(i)
Page 49 and 50: Touchscreen Modem Price display for
Page 51 and 52: Serial I/O Low Profile Serial and L
Page 53 and 54: Overview High Quality Products from
Page 55 and 56: Serial I/O Converter Automatically
Page 57 and 58:
Serial I/O Reliable Isolation and T
Page 59 and 60:
Converters Ethernet Communication C
Page 61 and 62:
Converters Isolated USB to Serial C
Page 63 and 64:
Acquisition Analog and Relay Output
show all

Serial I/O - ICSDataCom

Create successful ePaper yourself

Delete template?

Save as template?