Serial I/O - ICSDataCom

Ordering Code:
ME-63Xtend Series External Expansion Boards for Digital I/O:
ME-633
All models are standard Euro-size boards with
a DIN-rail mountable card carrier.
ME-631
on request
16 relays, change-over type C, 5 A/30 VDC,
240 VAC
ME-632
on request
16 opto-isolated digital inputs, 2.5 to 60 V,
12 kHz, isolation up to 2500 V rms
on request
Connectivity and cables/accessories see charts on the previous pages!
Ordering Code:
ME-UB Series External Expansion
Boxes for Digital I/O:
All models are desktop connectivity boxes with additional
I/O functions
ME-UBOI
on request
8 opto-isolated digital inputs, 2.5 to 60 V, 12 kHz,
isolation up to 2500 V RMS
ME-UBOO
on request
8 opto-isolated digital outputs, 0.6 to 60 V, 5 kHz,
isolation up to 2500 V RMS
ME-UBRE
8 relays, change-over type C, 5 A/240 VAC
on request
Specifications and Overview:
Model
Relays:
ME-631
Relays:
ME-UBRE
Opto inputs: ME-
632/
ME-UBOI
Opto outputs:
ME-633/
ME-UBOO
ME-63Xtend and ME-UB series
Opto I/O: Solid state relays:
ME-634
ME-635
Relays
16 relays type C
(change over)
8 relays type C
(change over)
- - - 16 solid state
relays
8 1) 2.5…60 V, 12 kHz, -
8 -
0.6…60 V, 5 kHz,
-
Specs
5 A/30 VDC or 5 A/240 VAC - - - 5 A/240 VAC
240 VAC
Opto-isolated digital
- - ME-UBOI: 8;
-
inputs
ME-632: 16 1)
Specs - - 2.5…60 V, 12 kHz,
2500 VAC RMS 2500 VAC RMS isolation up to
isolation up to
Opto-isolated digital
- - - ME-UBOO: 8;
outputs
ME-633: 16 2)
Specs - - - 0.6…60 V, 5 kHz,
2500 VAC eff 2500 VAC eff
300 mA cont. /
400 mA peak ;
isolation up to
300 mA cont. /
400 mA peak ;
isolation up to
General ME-63Xtend Series ME-UB Series
Status 1 status LED per channel 1 status LED per channel
Connector -> PCI board 78-pin D-sub male 15-pin D-sub female
Connector -> I/O lines Spring terminals Spring terminals
Connector -> other lines 25-pin D-sub female -
Connect to…
ME-1400, ME-1400A, ME-1000 (not ME-634), ME- ME-1400, ME-FoXX series
FoXX series;
Size (mm) 160 x 100 - (desktop box)
Mounting Card carrier for DIN rails incl. - (desktop box)
1) Can be connected separately or in groups: Max. every 4 channels can be refered to a
common power supply or GND. These individual groups can be combined.
2) Can be connected separately or in groups: Max. every 8 channels can be refered to a
common power supply with a pull-up resistor. Max. every 4 channels can be refered to a
common GND. These individual groups can again be combined.
Meilhaus Electronic Data Acquisition Boards
35