Serial I/O - ICSDataCom

ME-94 cPCI and PCI
ME-95 cPCI and PCI
ME-96 cPCI and PCI
Specifications:
ME-96, ME-95, ME-94
Opto inputs ME-94 ME-95 ME-96
Number 18 - 10
Level 24 V - 24 V
Voltage Low: 0…12 V; - Low: 0…12 V;
high: 13…24 V - high: 13…24 V
input current - input current
at 24 V: 7 mA
at 24 V: 7 mA
Isolation Up to 500 VDC - Up to 500 VDC
Rate Max. 1 kHz 1) - Max. 1 kHz 1)
Interrupt Two of the input - One of the input lines
lines can be used - can be used as
as interrupt control
interrupt control
lines/strobe and
line/strobe and can
can generate an
generate an interrupt
interrupt on status
on status changes
changes from high
from high to low
to low
Opto outputs ME-94 ME-95 ME-96
Number - 16 8
- defi nite status (0) defi nite status (0) at
at power-on
power-on
Level - 24 V 24 V
Voltage - Output high imped- Output high imped
ance; voltage -0.1 V ance; voltage -0.1 V
(output high min.) (output high min.)
Driver current - Max. 220 mA Max. 100 mA
Isolation - Up to 500 VDC Up to 500 VDC
Rate Max. 1 kHz 1) Max. 1 kHz 1)
General (all models)
Bus interface 32 bit/33 MHz StandardPCI bus or CompactPCI/PXI bus. PCI Local
Bus 2.1 compatible
Size (mm) PCI: ~174 x 98. CompactPCI/PXI: 160 x 100 (3 U)
Connectors ME-96: 2x 15-pin D-sub male;
ME-95 and ME-94: 25-pin D-sub male;
PCI models: 2-pin low voltage connector DIN 45323 (external power
supply: 24 V nominal; fuse for external power F1: 1.6 AT/250 V);
CompactPCI/PXI models: External power supply via CompactPCI slot
connector
* effective suppression of fast transients in µs range
2x 15-pin D-sub male
ME-96
2x ME AK-D15
Meilhaus Electronic Data Acquisition Boards
2x ME AB-D15F
15/25-pin D-
Software:
Including: ME-Power-CD with…
Drivers for Windows 98/Me, NT, 2000, XP.
Supports Visual C++, Delphi, Visual Basic and
Borland C/C Builder.
Driver for Agilent VEE und LabVIEW.
Support software for Linux (source code
under GPL)
Drivers for QNX (source code under QNX
Community License)
Drivers for VxWorks 5.4.2.
Utilities, examples, demos.
“Soft manuals” English and German, for Acrobat
Reader (printed manuals as an option/extra
charge)
Ordering Code:
ME-94 PCI 380.00 $
24 V PCI opto input board, 18 inputs.
ME-95 PCI 380.00 $
24 V PCI opto output board, 16 outputs.
ME-96 PCI 430.00 $
24 V PCI opto I/O board, 10 inputs/8 outputs.
ME-94 cPCI 440.00 $
ME-95 cPCI 440.00 $
ME-96 cPCI 449.00 $
See above, but for CompactPCI/PXI platform
Web: www.meilhaus.com/e_me
Accessories:
Cable ME AK-D15 (2 m) 45.00 $
15-pin D-sub male and 15-pin D-sub female (1:1), connects
ME-96 to terminal block
Terminal block ME AB-D15F 78.00 $
15-pin D-sub female and spring terminals, for ME-96
Cable ME AK-D25 (2 m) 50.00 $
25-pin D-sub male and 15-pin D-sub female (1:1), connects
ME-94 or ME-95 to terminal block
Terminal block ME AB-D25F 80.00 $
25-pin D-sub female and spring terminals, for ME-94
and ME-95
Web: www.meilhaus.com/e_me
25