Jobber drills with straight shank DIN 338

Straight shank holder Multiplex
Works Standard
Countersink angle 180°
Article no. 86730 R
Range of applications
Step drills for efficient drilling and countersinking
in one operation. Tools require
no regrinding. To replace drill and countersink
blades, simply loosen the clamp
screws.
Step drills for drilling through holes to
DIN-ISO 273 and screw-head countersinks,
forms H, J and K. Medium design
to DIN 74, part 2.
For drilling of steel and cast steel alloyed
and non-alloyed, grey cast iron, malleable
cast iron, spheroidal graphite iron,
bronze, brass.
Manufacturing specifications
Point grind: facet ground, suitable
for the indexable insert
Point angle: see interchangeable blades
Web thinned: see interchangeable blades
Helix angle: standard
Web thickness: standard
Web taper: standard
Flute form: wide flutes
Tolerance on Ø: see interchangeable
blades
Surface finish: steam tempered
#d1# 86730
50
R
for
threads
countersink Ø
d 2
mm
drill Ø
d 1
mm
overall length
l 1
mm
flute length
l 2
mm
step length
l 3
mm
B
mm
Code no. –
–
M 10 18.0 11.0 120 59 23 2.5 18.000 ○
M 12 20.0 13.5 128 69 27 3.5 20.000 ○
M 14 24.0 15.5 140 81 31 3.5 24.000 ○
M 16 26.0 17.5 148 91 35 3.5 26.000 ○
M 18 30.0 20.0 157 102 39 4.0 30.000 ○
M 29 33.0 22.0 167 112 43 4.0 33.000 ○
Torx screws
for step drills step angle 90°
Article no. 86807
for
holder
no.
Torx screws*
for drilling
G
Article no.
unit price
price gr. 50
Torx screws*
for countersinking
G
Article no.
packed in units of
5 pieces
86730 18.000 M 2 x 4 86807 2.000 M 2 x 4 86807 2.000
86730 20.000 M 2.5 x 5 86807 2.500 M 2 x 4 86807 2.000
86730 24.000 M 2.5 x 5 86807 2.500 M 2.5 x 5 86807 2.500
86730 26.000 M 2.5 x 7 86807 2.501 M 2.5 x 7 86807 2.501
86730 30.000 M 3 x 6 86807 3.000 M 4 x 9 86807 4.000
86730 33.000 M 3 x 6 86807 3.000 M 4 x 9 86807 4.000
* Each holder is delivered including 4 Torx screws.
230