guideline and standards for skytem measurements, processing and ...

(January 2010)
Row
Transmitter, TX3-devise, for “multi moment” mode (not yet in production)
1 Devise type [TX3]
1-8 GMT-system time, [yyyy mm dd hh mm ss zzz]
9 NumberOfShots: The total number of transients, NumberOfDatasets *
NumberOfSerie.
10 MomentID: Moment ID in instrument script file
11 DatSeqCount: Dataset counter from TX. Can be match with TIB data.
12 Nplus: The number of positive currents in stack.
13 Nminus: The number of negative currents in stack.
14 VoltageOn: The battery voltage during transmitter on time, [V].
15 VoltageOff: The battery voltage during transmitter off time, [V].
16 TxTemperature: The temperature of the transmitter, [°C].
17 Mean_Current: The mean transmitter current for NumberOfSeries. Measured
for before the ramp off, [A]. Current is looped over the NumberOf-
Datasets.
18 Max_Current: The maximum current for NumberOfSeries measurements
[A].
19 Min_Current: The minimum current, for NumberOfSeries measurements,
[A].
20 RMS_Current: The RMS current for NumberOfSeries measurements. Not
calculated !
3