Project Manual - Volume 2 of 3.pdf - Hall Construction

More documents

Recommendations

Info

New Jersey Schools Development Authority Design-Build Performance Specifications New Caruso Elementary School Keansburg Public Schools 9. Provide cutouts and reinforcing for security devices as required. J. Door Finish Schedule 1. Basis of Design: Factory-applied PPG Duranar fluoropolymer coatings; colors to be determined. a. Provide G90 galvanizing and factory prime coat(s) on ferrous components. END OF SECTION B2050.30 June 27, 2013 Section B2050.30 Page 4 of 4 Exterior Oversize Doors
New Jersey Schools Development Authority Design-Build Performance Specifications New Caruso Elementary School Keansburg Public Schools SECTION B2080.00 EXTERIOR WALL APPURTENANCES PERFORMANCE A. Basic Function 1. Exterior wall appurtenances include all elements attached to the outside of the exterior walls, except where an integral part of equipment or service elements. Appurtenances required are those made necessary by the design and may include the following: a. Exterior louvers. b. Exterior canopies. c. Exterior railings and handrails. d. Main building identification signs. 2. Where exterior wall appurtenances also have a function defined in another element group, design such elements as specified for that element group, in addition to the requirements specified in this section. 3. Do not provide exterior wall appurtenances that are lower than 12 feet above adjacent grade, with the exception of railings and handrails. 4. Basis of Design: Where brand names are listed, they represent the Basis of Design unless those items are identified as approved proprietary items in project requirements. B. Amenity and Comfort 1. Railings and handrails a. Provide exterior tube railings, balusters, guard rails, wall railings, infill panels and fittings at all stairs, ramps, and other locations to protect, assist and guide people and as required to meet all applicable codes and standards. b. Provide railings and handrails that are in full compliance with barrier-free and all other codes and standards. c. Provide railings and handrails that are smooth in texture, with formed radius ends and bends and all joints welded and ground smooth. 2. Signs: Provide signs that are legible during daylight and nighttime hours by pedestrians and motorists from far side of adjacent street. C. Structure 1. Provide engineered anchorage for all wall appurtenances, to support all dead and applied loads in accordance with codes and other standards. 2. For louvers, sunscreens, canopies, and other large appurtenances subjected to significant gravity, wind, snow or other loading, provide for structural support from building structural frame and/or foundation rather than from exterior wall. 3. For railings, signs, and other small appurtenances attached to exterior wall, provide embedments installed during wall construction wherever possible. 4. Assemble units in the shop to greatest extent possible to minimize field splicing and assembly. Disassemble units only as necessary for shipping and handling limitations. June 27, 2013 Section B2080.00 Page 1 of 4 Exterior Wall Appurtenances
Page 1 and 2: New Jersey Schools Development Auth
Page 3 and 4: SMALL BUSINESS ENTERPRISE (SBE) REQ
Page 5 and 6: D5030.10 Branch Circuits D5040.00 A
Page 33: New Jersey Schools Development Auth
Page 85 and 86:
New Jersey Schools Development Auth
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
NJSDA Design Manual for Design-Buil
Page 299 and 300:
Page 301 and 302:
Page 303 and 304:
Page 305 and 306:
Page 307 and 308:
show all

Project Manual - Volume 2 of 3.pdf - Hall Construction

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?