Project Manual - Volume 2 of 3.pdf - Hall Construction

New Jersey Schools Development Authority
Design-Build Performance Specifications
New Caruso Elementary School
Keansburg Public Schools
c. Depth: Three inches.
d. Finish: PPG Duranar XL with clear finish coat; color Natural Wicker.
e. Sign Message: [NAME OF SCHOOL].
METHODS OF CONSTRUCTION
A. Materials
1. Provide hot-dip galvanizing or stainless steel for all ferrous components.
2. Provide positive separation of dissimilar metals.
B. Anchorages and Attachments
1. Provide anchorages and attachments that permit and facilitate removal if repair or
replacement becomes necessary.
2. Provide concealed fasteners, anchorages and attachments wherever feasible. Where
fasteners, anchorages and attachments must be exposed, provide tamperproof systems.
3. To the extent possible, provide anchorages for embedment at time of masonry
construction.
C. Louvers and other openings
1. Construct openings and components of openings to provide positive drainage of water to
exterior of the building.
2. Top of Openings: If wall construction does not provide its own methods of drainage, use
separate flashing to prevent water from entering opening components or the interior of
the building.
3. Bottom of Openings: Integral or separate sill or flashing to prevent water running over or
draining out of opening components from entering the wall construction below or the
interior of the building. Provide end dams and other components in compliance with
Materials and Systems Standards.
END OF SECTION B2080.00
June 27, 2013 Section B2080.00 Page 4 of 4
Exterior Wall Appurtenances