Project Manual - Volume 2 of 3.pdf - Hall Construction

New Jersey Schools Development Authority
Design-Build Performance Specifications
New Caruso Elementary School
Keansburg Public Schools
Clearly mark units for reassembly and coordinated installation. Use connections that
maintain structural value of joined pieces
5. Thermal Movements: Provide expansion joints that allow for thermal movements
resulting from locally anticipated change (range) in ambient and surface temperatures by
preventing buckling, opening of joints, overstressing of components, failure of
connections, and other detrimental effects. Base engineering calculation on surface
temperatures of materials due to both solar heat gain and nighttime-sky heat loss.
D. Durability
1. Water Penetration Resistance
a. Maintain integrity of exterior wall envelope at all points of wall appurtenance
penetration and attachment.
b. Air Intake and Exhaust Openings: Minimize rainwater penetration and protect
adjacent interior spaces from damage from water.
(1) Provide louvers in compliance with AMCA 511 Penetration Class A for winddriven
rain.
E. Material and Finish
1. Provide appurtenances with all exposed components constructed of stainless steel,
aluminum, or other noncorrosive materials.
2. Provide exposed surfaces without painted or coated finishes wherever possible.
3. For painted finishes, provide mica fluoropolymer or metallic fluoropolymer finish
complying with AAMA 2605-02, in manufacturer’s standard range of colors.
F. Impact Resistance
1. Locate, fabricate and install all exterior wall appurtenances to resist damage from
vandalism.
2. Locate, fabricate and install all exterior wall appurtenances to protect building users and
passersby, and to resist damage from vehicles and pedestrians.
PRODUCTS
A. Exterior Louvers
1. Provide custom aluminum louvers as follows:
a. AMCA 511 Class A for wind-driven rain.
b. Sightproof for first floor installations.
2. Provide interior bird screens.
3. Provide insulated blank-off panels to close portions not needed for ventilation.
4. Provide motor operated dampers as required by HVAC design.
5. Provide factory-applied fluoropolymer finish in manufacturer’s standard colors.
B. Canopies
1. Basis of Design: MASA Architectural Canopies, Avenel NJ.
June 27, 2013 Section B2080.00 Page 2 of 4
Exterior Wall Appurtenances