Installation and Operating Instructions GEN-AUTO Energy Division
Installation and Operating Instructions GEN-AUTO Energy Division
Installation and Operating Instructions GEN-AUTO Energy Division
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Contents<br />
Page<br />
Section 4 Commissioning 26<br />
Section 5 Operation 27<br />
5.1 Controls <strong>and</strong> Indicators 27<br />
5.2 Starting the Engine 30<br />
5.3 Stopping the Engine 30<br />
Section 6 Fault Finding 31<br />
6.1 General 31<br />
6.2 Fault indications 31<br />
6.2.1 Low Oil Pressure LED 31<br />
6.2.2 High Temperature LED 31<br />
6.2.3 Start Failure LED 31<br />
6.2.4 Charge generator Failure LED 32<br />
6.2.5 Low/High Speed LED 32<br />
6.2.6 Alternator Voltage Failure LED 32<br />
6.2.7 EStP– Emergency Stop 32<br />
6.2.8 bAT1 - Low Battery Voltage message 32<br />
6.2.9 bAT2 - Weak Battery Alarm message 32<br />
6.2.10 bAEr – Routine Maintenance Due 33<br />
6.2.11 ocr -Over Current Failure message 33<br />
(<strong>GEN</strong>-<strong>AUTO</strong>/XM only)<br />
Section 7 Specification 34<br />
Section 8 PC Interface 36<br />
8.1 Technical Specifications 36<br />
8.2 <strong>Installation</strong> 37<br />
8.2.1 To run the software 38<br />
8.3 Description 38<br />
8.3.1 Observation Window 39<br />
8.3.2 Operator Parameters Window 40<br />
8.3.3 Technician Parameters Window 40<br />
8.4 Main Menu 41<br />
8.4.1 File 41<br />
8.4.2 Programming 41<br />
8.4.3 Settings 42