Marine Generator Panda PMS 8 âminiâ E-TEC Icemaster Fischer ...
Marine Generator Panda PMS 8 âminiâ E-TEC Icemaster Fischer ...
Marine Generator Panda PMS 8 âminiâ E-TEC Icemaster Fischer ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Maintenance Instructions<br />
Oil dipstick<br />
With the help of the engine oil dipstick the<br />
oil level is to examined. The prescribed filling<br />
level may not exceed the „Max“ marking.<br />
We recommend 2/3 oil level.<br />
B.4 Checking the water separator in the fuel supply<br />
The pre-filter with water separator has a<br />
cock at its lower surface, with this cock the<br />
downward sunk water can be discharged.<br />
This is simply possible, water is heavier<br />
due to its density than the Diesel.<br />
B.4.1 De-aerating the fuel system<br />
Normally, the fuel system is designed to bleed out air itself i.e. as soon as the electric starter<br />
motor starts operation the fuel pump starts working and the fuel system will be de-aerated after<br />
some time automatically. It is nevertheless essential to bleed the system as follows prior to the<br />
first operation (as all hoses are empty):<br />
1. Switch the main „Stand by“ switch on control panel to „ON“. Functional components must illuminate.<br />
Page 18<br />
<strong>Panda</strong> <strong>PMS</strong> 8 "mini" E-<strong>TEC</strong> s00585 - Chapter B: Maintenance Instructions
Change language