Marine Generator Panda PMS 8 âminiâ E-TEC Icemaster Fischer ...
Marine Generator Panda PMS 8 âminiâ E-TEC Icemaster Fischer ...
Marine Generator Panda PMS 8 âminiâ E-TEC Icemaster Fischer ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Installation Instruction<br />
D.2 <strong>Generator</strong> Connections - Scheme<br />
The generator comes supplied with all supply lines (i.e. electric cables, fuel lines etc.) already<br />
connected to the motor and generator. The supply lines are fed through the capsule's front base<br />
panel and are shielded at the capsule inlets with water-proof grommets.<br />
All electrical connections, cable types and sizes must comply to the appropriate regulations.<br />
The supplied cables are rated for ambient temperatures up to 70°C (160°F). If the<br />
cables are required to meet higher temperature requirements, they must be run through<br />
conduits.<br />
ATTENTION! Before working (installation) on the System read the section “Safety Instructions”<br />
on page iv. in this Manual.<br />
1 2 3 4 5 6 7 8<br />
1. Raw water inlet<br />
2. Fuel supply (in)<br />
3. Fuel return line (out)<br />
4. Cable for external fuel pump<br />
5. Motor oil drain hose<br />
6. Cable for main power<br />
7. <strong>Generator</strong> Starter-battery negative (-)<br />
8. <strong>Generator</strong> Starter-battery positive (+)<br />
1<br />
2<br />
3 4<br />
1. Intake to external expansion tank<br />
2. Backflow from external expansion tank<br />
3. Exhaust output<br />
4. Connection external ventilation valve<br />
Page 46<br />
<strong>Panda</strong> <strong>PMS</strong> 8 "mini" E-<strong>TEC</strong> s00585 - Chapter D: Installation Instruction