Geneko GWR Cellular Gateway Series User Manual (PDF) - 4Gon

USER MANUAL
GWR Series Router
Add/Remove/Update manipulation in tables
To Add a new row (new rule or new parameter) in the table please do following:
• Enter data in fields at the bottom row of the table (separated with a line).
• After entering data in all fields click Add link.
To Update the row in the table:
• Change data directly in fields you want to change
To Remove the row from the table:
• Click Remove link to remove selected row from the table.
Save/Reload changes
To save all the changes in the form press Save button. By clicking Save data are checked for validity. If
they are not valid, error message will be displayed. To discard changes press the Reload button. By
clicking Reload, previous settings will be loaded in the form.
Status Information
The GWR Router’s Status menu provides general information about router as well as real-time
network information. Status menu has three parts:
General Information,
Network Information (LAN),
WAN Information.
Status - General
General Information Tab provides general information about device type, device firmware
version, OS version, hardware resources utilization, MAC address of LAN port and Up Time since last
reboot. Screenshot of General Router information is shown at Figure 7. Data in Status menu are read only
and can not be changed by user. If you want to refresh screen data press Refresh button.
SIM Card detection is performed only at time booting the system.
16
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299