Geneko GWR Cellular Gateway Series User Manual (PDF) - 4Gon
Geneko GWR Cellular Gateway Series User Manual (PDF) - 4Gon
Geneko GWR Cellular Gateway Series User Manual (PDF) - 4Gon
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
USER MANUAL<br />
<strong>GWR</strong> <strong>Series</strong> Router<br />
Label<br />
Hostname<br />
Password<br />
Enable log<br />
Port to bind at<br />
Hostname<br />
Password<br />
Port to bind at<br />
Start<br />
Stop<br />
Restart<br />
Save<br />
Reload<br />
Description<br />
RIP Settings<br />
Routing Manager<br />
Prompt name that will be displayed on telnet console.<br />
Login password.<br />
Enable log file.<br />
Local port the service will listen to.<br />
RIPD<br />
Prompt name that will be displayed on telnet console of the Routing<br />
Information Protocol Manager.<br />
Login password.<br />
Local port the service will listen to.<br />
Start RIP.<br />
Stop RIP.<br />
Restart RIP.<br />
Routing Information Protocol Status<br />
Click Save to save your changes back to the <strong>GWR</strong> Router.<br />
Click Reload to discard any changes and reload previous settings.<br />
Table 8 - RIP parameters<br />
RIP routing engine for the <strong>GWR</strong> Router<br />
Use telnet to enter in global configuration mode.<br />
telnet 192.168.1.1 2602 // telnet to eth0 at TCP port 2602///<br />
To enable RIP, use the following commands beginning in global configuration mode:<br />
router# router rip<br />
To associates a network with a RIP routing process, use following commans:<br />
router# network [A.B.C.D/Mask]<br />
By default, the <strong>GWR</strong> Router receives RIP version 1 and version 2 packets. You can configure the<br />
<strong>GWR</strong> Router to receive an send only version 1. Alternatively, tou can configure the <strong>GWR</strong> Router to<br />
receive and send only version 2 packets. To configure <strong>GWR</strong> Router to send and receive packets from only<br />
one version, use the following command:<br />
router# rip version [1|2] // Same as other router //<br />
Disable route redistribution:<br />
router# no redistribute kernel<br />
router# no redistribute static<br />
router# no redistribute connected<br />
28<br />
<strong>4Gon</strong> www.<strong>4Gon</strong>.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
Change language