Section 2 - slam latches - single point - Tu-val
Section 2 - slam latches - single point - Tu-val
Section 2 - slam latches - single point - Tu-val
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
EBERHARD<br />
s e c t i o n 2<br />
<strong>slam</strong> <strong>latches</strong> - <strong>single</strong> <strong>point</strong><br />
No. 3-5901<br />
No. 3-5900<br />
Shown<br />
Reverse Slam Bolt Paddles allow installation on vertically acting<br />
lids, covers and panels, so that the underside of the paddle is protected<br />
from the accumulation of snow, ice and unwanted debris.<br />
Finish: Carbon Steel – Zinc Plated or Bright Polish Stainless Steel.<br />
No. 18-5901<br />
No.<br />
Option<br />
3-5900 Non-Key-Locking - 4 Mounting Holes .203"<br />
diameter<br />
3-5901 Key-Locking - 4 Mounting Holes .203" diameter<br />
18-5901 Key-Locking - 4 Mounting Holes .203" diameter<br />
Inside Release Knob<br />
No. 9700-U<br />
Key-Locking/Slide Bolt<br />
Version<br />
Patent Pending<br />
No. 9700-U<br />
Automotive style of <strong>slam</strong> latch with an aesthetically pleasing finish<br />
and the added security of blind mount. Receptacle is carbon steel,<br />
zinc-plated, then black powder coated. The paddle is 300 Series<br />
stainless steel, brushed finish. Available in non-locking version<br />
(Part No. 9701-U). Optional gaskets available made out of black<br />
plastic polypropylene. Double bitted key cylinder standard.<br />
Optional Gaskets Available:<br />
1-9600-15BH Inside gasket – horizontally mounted paddle<br />
1-9600-15BV Inside gasket – vertically mounted paddle<br />
1-9600-15AH Outside gasket – horizontally mounted paddle<br />
1-9600-15AV Outside gasket – vertically mounted paddle<br />
page 24