Section 2 - slam latches - single point - Tu-val
Section 2 - slam latches - single point - Tu-val
Section 2 - slam latches - single point - Tu-val
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
EBERHARD<br />
s e c t i o n 2<br />
<strong>slam</strong> <strong>latches</strong> - <strong>single</strong> <strong>point</strong><br />
No. 685-PK<br />
No. 685-PK<br />
Patented Pending<br />
The 685-PK Push Button <strong>slam</strong> latch is designed for top opening lids<br />
and is ideal for applications such as a gull wing tool box. The design<br />
incorporates a water resistant push button with dual internal o-rings and<br />
a foam gasket pre-installed on the latch. When the latch is in the locked<br />
position the locking cam is not in position to actuate the latch making<br />
forced entry more difficult. The push button incorporates a double bitted<br />
key (Keyed H700D-H759D). Mounting is simplified with a slide on<br />
retainer clip once the product is mounted through the cut-out.<br />
No. 3-481-SSR<br />
No. 3-481-SSR/3-481-SSL<br />
Key-locking, stainless steel paddle latch available in Right or Left hands,<br />
comes with <strong>single</strong> hook design that uses .250 striker diameter for <strong>single</strong><br />
<strong>point</strong> applications or extended lever arm that can use a rod adaptor (.439<br />
diameter adaptor needed) to create a multi-<strong>point</strong> application. Latch was<br />
designed for low profile applications, such as toolboxes. Parts supplied with<br />
four .20 diameter mounting holes and two keys per latch (CH501-CH510)<br />
available. Contact factory for options.<br />
page 34<br />
®* Handle/Housing Assembly Reg. Trademark