Section 2 - slam latches - single point - Tu-val
Section 2 - slam latches - single point - Tu-val
Section 2 - slam latches - single point - Tu-val
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
EBERHARD<br />
s e c t i o n 2<br />
<strong>slam</strong> <strong>latches</strong> - <strong>single</strong> <strong>point</strong><br />
No. 561<br />
For 5/16" Rod<br />
No. 561<br />
No. 563<br />
No. 563<br />
For 3/8" Rod<br />
No. 561/563<br />
These simple, effective strikes<br />
are intended for use with many latching mechanisms<br />
having 3/8" dia. rods (Part No. 563) or 5/16" dia. rods (Part No.<br />
561), which normally operate as dead bolts. The strikes have a<br />
spring-loaded plunger, which permits the rod to pass into the striker<br />
and capture it. The rod cannot be released in the opposite direction.<br />
Instead, the rod is withdrawn in customary dead-bolt fashion. See<br />
illustration. Part No. 561 has a plastic and glass-filled bolt, stainless<br />
steel spring, and a zinc die cast housing. Weight is .13 lbs. with a<br />
maximum load of 100 lbs. Part No. 563 has a zinc die cast bolt,<br />
stainless steel spring, and a zinc with yellow dichromate finish on<br />
the housing with a maximum load of 750 lbs. Attach either with<br />
screws, rivets, or bolts.<br />
No. 1-561 (Tapered Strike)<br />
For 3/8" Rod<br />
SLAM<br />
WITHDRAW<br />
No. 2-563<br />
Available with 1/4-20<br />
threaded mounting holes and .530 dia. boss.<br />
page 40
Change language