Model 24927 - Ready Remote
Model 24927 - Ready Remote
Model 24927 - Ready Remote
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Programming System Settings<br />
Many of the features and operations of this system can be changed<br />
to suit most of today's vehicle electrical systems. The programming<br />
routine and feature menus that follow will allow making the<br />
changes required for most vehicle installations.<br />
System programming routine:<br />
Accessing a Menu:<br />
1. Turn the ignition ON and then OFF in less than 5 seconds<br />
2. Within 3 seconds, Press/Hold the Momentary switch<br />
3. After 2 seconds, the LED will flash and the Horn/Siren<br />
will pulse to indicate the available menus. It will toggle<br />
through the outputs until a menu is chosen.<br />
a. Menu 1: 1 LED flash and 1 Horn/Siren pulse<br />
b. Menu 2: 2 LED flashes and 2 Horn/Siren pulses<br />
4. Release the Momentary switch after the appropriate<br />
output in order to access that Menu. The LED and<br />
Horn/Siren outputs will cease.<br />
Accessing a Feature Location:<br />
1. Press and release (do not hold) the Momentary switch<br />
the same number of times as the feature location to be<br />
accessed. See the Feature Chart for locations.<br />
2. After 2 seconds the LED will flash (the number of flashes<br />
will match with the feature location) to confirm the<br />
feature location. It will flash/pause and repeat until the<br />
feature is changed or programming is exited.<br />
© 2007 Directed Electronics<br />
53
Change language