3.1 Commands and responses MT-SICS level 0 - Mettler Toledo

I0
Inquiry of all implemented MT-SICS commands
Command
I0
Send list of all implemented MT-SICS commands
Response
I0/B/x1/"1.Command"
x1 = number of the MT-SICS level
where the 1. Command belongs to.
I0/B/x1/"2.Command"
: 2nd (next) command implemented
:
I0/A/x1/"last Command"
Last command implemented
I0/A
End of the list
I0/I
The list cannot be sent at present as
another operation is taking place
Example
Command
I0
Send list of commands
Response
I0/B/0/"I0"
I0/B/0/"I1"
:
:
:
I0/B/0/"S"
:
:
I0/B/0/"Z"
I0/B/0/"@"
I0/B/1/"D"
I0/B/1/"DW"
Level 0 command "I0" implemented
Level 0 command "I1" implemented
Level 0 command "S" implemented
Level 0 command "Z" implemented
Level 0 command "@" (reset) implemented
Level 1 command "D" implemented
Level 1 command "DW" implemented
:
:
:
:
:
Comments
• The I0 command lists all commands implemented in the present software. Thus, there is no
need of the supplement sheet delivered with the previous versions of this manual.
• All level 0 commands are listed in alphabetical order before all commands of level 1 etc.
This order corresponds th the order how the commands are described in this manual.
12