3.1 Commands and responses MT-SICS level 0 - Mettler Toledo

More documents

Recommendations

Info

HA20 Inquiry of instrument status Command HA20 Inquiry of instrument status Response HA20/A/x x = 0 Status: "Standby" x = 1 Status: "Basic mode" x = 2 Status: "Ready for taring" x = 3 Status: "Weighing in" x = 4 Status: "Ready for start" x = 5 Status: "Drying" x = 6 Status: "End of drying" x = 7 Status: "Entry" x = 10 Status: "Startup" x = 11 Status: "Taring" x = 12 Status: "Weight adjustment" x = 13 Status: "Temperature adjustment" x = 101 Status: "Error 1" … … x = 10n Status "Error n", see operating instructions of the Halogen Moisture Analyzer Comment With the message HA20/A/6 instrument status "End of drying", it is not apparent whether drying was ended correctly or terminated. This is possible only via the command HA25 – Inquiry of drying weight. 32
HA21 Inquiry of automatic sample chamber position Command HA21 Inquiry of automatic sample chamber position Response HA21/A/x x = 0 Automatic sample chamber closed x = 1 Automatic sample chamber open x = 2 Automatic sample chamber not in end position HA22 Command Response Inquiry of last weight adjustment HA22 Inquiry of last successful weight adjustment HA22/A/x1/x2/x3/x4/x5/x6 x1 Number of the successful adjustments x2 Day of the last successful adjustment x3 Month of the last successful adjustment x4 Year of the last successful adjustment x5 Hour of the last successful adjustment x6 Minute of the last successful adjustment Example Command Response HA22 HA22/A/15/29/02/1996/09/34 A total of 15 successful weight adjustments have been performed. The last took place on February 29, 1996 at 9.34. Comments • The time of the last successful weight adjustment is specified in the 24-hour format. • Possible years are 1970 … 2037. • The counter for the weight adjustments runs to 65535. 33
Page 1 and 2: Reference Manual METTLER TOLEDO Sta
Page 3 and 4: Contents Overview of all commands 2
Page 5 and 6: Status inquiries HA07 Report instru
Page 7 and 8: The commands of MT-SICS level 2 and
Page 9 and 10: 2. Basic information on data interc
Page 11 and 12: 2.2.2 Format of the response withou
Page 13 and 14: 3. Commands and responses The Halog
Page 15 and 16: I1 Inquiry of MT-SICS level and MT-
Page 17 and 18: S Command Response Example Command
Page 19 and 20: ZI Zero immediately Command Respons
Page 21 and 22: 3.2 Commands and responses MT-SICS
Page 23 and 24: 3.3 Commands and responses MT-SICS
Page 25 and 26: PWR Power on/off Command PWR/x Swit
Page 27 and 28: TIM Time Inquiry of time Command Re
Page 29 and 30: Remote operation HA90 Report keys 5
Page 31 and 32: HA04 Open / close automatic sample
Page 33: HA08 Request printer records Comman
Page 37 and 38: HA25 Command Response Inquiry of dr
Page 39 and 40: Example 2 Command Response HA26/2 I
Page 41 and 42: HA40 Inquiry / setting of language
Page 43 and 44: Parameters x4 Protection against ch
Page 45 and 46: HA60 Inquiry / activation of method
Page 47 and 48: Parameters x1 Number of the method
Page 49 and 50: HA62 Inquiry / setting of method pa
Page 51 and 52: HA80 Command Response Inquiry of jo
Page 53 and 54: HA81 Command Response Inquiry of jo
Page 55 and 56: HA83/I HA83/L HA83/EOB x5 Standard
Page 57 and 58: HA90 Report keys Command Response H
Page 59 and 60: HA91 Command Response Alphanumeric
Page 61 and 62: HA93 Command Response Real entry (p
Page 63 and 64: HA95 Command Response Time entry HA
Page 65 and 66: 5. What if...? Tips from actual pra
Page 67 and 68: Leerseite

3.1 Commands and responses MT-SICS level 0 - Mettler Toledo

Create successful ePaper yourself

Delete template?

Save as template?