3.1 Commands and responses MT-SICS level 0 - Mettler Toledo

D
Display
Write into display
Command D/"TEXT"
Response D/A
D/R
D/I
D/L
Write TEXT into Halogen Moisture Analyzer display
TEXT appears unabridged left-aligned in the Halogen Moisture
Analyzer display marked by the symbol *
The end of the text appears in the Halogen Moisture Analyzer
display, the start is cut off and text is marked by the symbol *
Command not executable
Command understood, parameter wrong
Example
Command
Response
D/"HALLO"
D/A
Write HALLO into the Halogen Moisture Analyzer display
The full text HALLO appears in the Halogen Moisture Analyzer
display
Clear display
Command D/""
Response D/A
Clear Halogen Moisture Analyzer display
Display cleared, marked by the symbol *
Comments
• Max. 20 characters are admissible for "text".
• The following ASCII character set applies to "text":
0…9, A…Z, a…z, #, &, *, +, -, ., /, [, ], /, :.
• A display command can be cleared with the Reset key.
• This command can be executed only in the instrument statuses "basic mode", "ready for
taring", "weighing-in" and "ready for start".
• For details see Reference manual 705184.
DW – Weight display (Display show Weight)
Command
Response
DW
DW/A
DW/I
Switch display to weight mode
Display shows the current weight value
Command not executable
Comment
This command can be executed only in the instrument statuses "basic mode", "ready for
taring", "weighing-in" and "ready for start".
20