VESTA GEA Tuchenhagen Pharmaceutical Brochure - Tri-Canada

Divert Valve Accessory Range Type W
Divert Valve Accessory Range Type W
4
Order Key
Material: AISI 316L for all wetted parts AL6XN and other high alloys available.
AISI 304L for all non-wetted parts
Contact GEA Tuchenhagen.
Control Air Pressure: Standard 87 PSI.g
Max Holding Pressure: 116 PSI.g (1"), 87 PSI.g (1.5" to 2"), 72 PSI.g (2.5" to 6") using Standard Actuator
Other pressures available – see section 8.2, chart 2a
2. Housing Combinations
K
V
P
O W Y U M X N Z G
Cv Values
(flow in US-gall./min at 1 PSI.g pressure drop)
Valve Size I-II I-III III-I III-VII VII-III
1" OD 31 28 29 21 21
1.5" OD 70 28 45 47 52
2" OD 140 44 66 85 77
2.5" OD 236 75 119 129 145
3" OD 305 136 127 161 159
4" OD 606 167 215 289 257
6" OD
H X
D
4
3. Stroke Length
R
Regular Stroke
4. Valve Size
1" 1.5" 2" 2.5" 3" 4" 6" M: Mix Match – see section 8.4
I
II
C
5. Actuator Type
C Air/Spring Normally Closed O Air/Spring Normally Open A Air/Air
III
Ø
GEA Tuchenhagen | 866.531.5629 | www.tuchenhagen.us
48
6. Seal Material
E EPDM V FKM H HNBR Other options available.
Contact GEA Tuchenhagen.
7. Connection Type
T Tri-Clamp B Butt Weld* *Applied to all ports unless otherwise specified.
Other process connections available.
8. Port Orientation Upper to Lower Housings
L0 Clamped
VI 0°
V2 0°
V3 0°
V0 Welded Vertical Port
9. Internal Surface Finish
2 30-35 Ra, external matte 4 15-20 Ra, external matte
6 20-25 Ra, external matte 8 15-20 Ra, external polish
W K - R - 1.5 - C - E T - V0 - 2 /28 -
90°
180°
270°
Order Key (Std)
upper
housing
lower
housing
11 - 16. Control Module
(see section 8.3)
11 12 13 14 15 16
0 0 0 0 0 Z
Add Order Key for Control Module
when required (section 8.3)
1 2 3 4 5 6 7 8 9 10 11 - 16
Valve
Type
Housing
Type
Stroke
Length
Valve
Size
Actuator
Type
Order key given in short form and will differ from factory-issued documents.
10. Available Special Accessories / Documentation
/E /16 /20 /21 /24 /28 /43 /50 /67 /41 /42 /BP /BPX
See section 8 for description of accessories and 1.1 for documentation.
Seal Connect
Material Type
Port
Orient
Finish
Special
Options
Control Module
Weights
Valve Size
Dimensions
Valve
Size
OD in accordance with ASME-BPE-a-2004, DIN 11866, Row C
Ø A B C D H X Stroke
1.0" OD 1 x 0.063 1.81 1.14 3.54 3.86 11.73 7.60 0.28
1.5" OD 1.5 x 0.063 2.32 1.54 3.54 5.31 13.51 7.60 0.87
2.0" OD 2 x 0.063 2.81 1.65 3.54 5.31 13.74 7.60 0.87
2.5" OD 2.5 x 0.063 3.54 2.13 4.92 6.69 15.44 7.60 0.75
3.0" OD 3 x 0.063 4.06 2.13 4.92 6.69 15.71 7.60 0.67
4.0" OD 4 x 0.078 5.02 2.72 4.92 8.27 16.03 7.60 0.87
6.0" OD
VII
lbs.
1" OD 22
1.5" OD 40
2" OD 40
2.5" OD 55
3" OD 55
4" OD 57
6" OD
X = Clearance required for maintenance
A
B
Add 1.1" to Dimensions B and C for
Tri-Clamp Connections*
*GEA Tuchenhagen recommends at least one
process connection for maintenance purposes.
Recommended flow direction to
prevent pressure surges during
the closing operation of the valve.
www.tuchenhagen.us | 866.531.5629 | GEA Tuchenhagen
49