VESTA GEA Tuchenhagen Pharmaceutical Brochure - Tri-Canada

Mixproof Valve Type D_L with Lifting Actuator
Mixproof Valve Type D_L with Lifting Actuator
Order Key
Material: AISI 316L for all wetted parts (housing ASME BPE) AL6XN and other high alloys available.
AISI 304L for all non-wetted parts
Contact GEA Tuchenhagen.
Control Air Pressure:
Standard 87 PSI.g
Cv Values
(flow in US-gall./min at 1 PSI.g pressure drop)
Valve Size I-II I-III III-IV III-I
Cavity Flush
GPM*
X
Max Holding Pressure:
116 PSI.g (1"), 87 PSI.g (1.5" to 2"), 72 PSI.g (2.5" to 4") using Standard Actuator
Other pressures available – contact GEA Tuchenhagen
1" OD 26 11 24 12 0.6
1.5" OD 69 34 68 27 2.0
5
2. Mixproof Options
2" OD 138 48 146 49 2.0
5
2.5" OD 228 108 232 74 2.1
3" OD 350 129 351 88 2.1
B
C
A
E
4" OD 681 194 653 167 2.1
GEA Tuchenhagen | 866.531.5629 | www.tuchenhagen.us
60
3. Mixproof Options
L With Seat Lift with connection C With Seat Lift without connection
for spray cleaning
for spray cleaning
4. Valve Size
1" 1.5" 2" 2.5" 3" 4" M: Mix Match – see section 8.4
5. Actuator Type
C Air/Spring Normally Closed
6. Seal Material
E EPDM V FKM H HNBR Other options available.
Contact GEA Tuchenhagen.
8. Port Orientation Upper to Lower Housings
L0 Clamped
VI 0°
V2 0°
V3 0°
V_ Welded
9. Internal Surface Finish
2 30-35 Ra, external matte 4 15-20 Ra, external matte
6 20-25 Ra, external matte 8 15-20 Ra, external polish
D B - L - 2 - C - E T - V3 - 2 /12 -
Order Key (Std)
11 12 13 14 15 16
0 0 0 0 0 Z
Add Order Key for Control Module
when required (section 8.3)
1 2 3 4 5 6 7 8 9 10 11 - 16
Valve
Type
Housing
Type
Mixproof
Options
Valve
Size
7. Connection Type
T Tri-Clamp B Butt Weld* *Applied to all ports unless otherwise specified.
Other process connections available.
Actuator
Type
Order key given in short form and will differ from factory-issued documents.
Seal Connect
Material Type
Port
Orient
Finish
90°
Special
Options
180°
270°
Control Module
upper
housing
lower
housing
10. Available Special Accessories / Documentation
/E /12 /16 /24 /25 /26 /32 /36 /43 /50 /67 /41 /42 /BP /BPX
See section 8 for description of accessories and 1.1 for documentation.
11 - 16. Control Module
(see section 8.3)
I
III
Weights
Valve Size
Dimensions
Valve
Size
OD in accordance with ASME-BPE-a-2004, DIN 11866, Row C
A H
Ø
K
Ø A C D H K X Stroke
1.0" OD 1 x 0.063 1.81 3.54 4.29 21.34 3.27 9.84 0.71
1.5" OD 1.5 x 0.063 2.32 3.54 4.29 22.72 3.70 9.84 0.87
2.0" OD 2 x 0.063 2.81 3.54 4.29 21.85 3.94 9.84 1.18
2.5" OD 2.5 x 0.063 3.54 4.92 5.31 23.50 5.04 9.84 1.18
3.0" OD 3 x 0.063 4.06 4.92 5.31 23.86 4.76 9.84 1.18
4.0" OD 4 x 0.078 5.02 4.92 6.69 24.13 5.43 9.84 1.18
X = Clearance required for maintenance
II
IV
lbs.
1" OD 23
1.5" OD 32
2" OD 45
2.5" OD 63
3" OD 67
4" OD 91
Add 1.1" to
Dimension C
for Tri-Clamp
Connections
For upper and
lower seat lift
rates, see page 84.
D
D
C
*
Recommended flow direction to
prevent pressure surges during
the closing operation of the valve.
* Cavity Cleaning:
Hose connection
for 1" OD
for 1.5" - 4" OD
Ø 6/4 mm
Ø 8/6 mm
Recommended operating pressure
for optimal cleaning efficiency:
36 PSI.g Min., 72 PSI.g Max.
www.tuchenhagen.us | 866.531.5629 | GEA Tuchenhagen
61