VESTA GEA Tuchenhagen Pharmaceutical Brochure - Tri-Canada

H
X
H
X
Mixproof Bottom Valve Type T
Mixproof Bottom Valve Type T
Order Key
Material: AISI 316L for all wetted parts (housing ASME BPE) AL6XN and other high alloys available.
AISI 304L for all non-wetted parts
Contact GEA Tuchenhagen.
Control Air Pressure:
Max Holding Pressure:
Standard 87 PSI.g
87 PSI.g (1.5" to 2"), 72 PSI.g (2.5" to 4") using Standard Actuator
Other pressures available – contact GEA Tuchenhagen
Weld jig
recommended
for housing
type U or T.
Ku
with housing connection U
Øu
Kt
with housing connection T
Øt
5
2. Housing Combinations
with housing connection T
L
T
with housing connection U
F
D
Cv Values
(flow in US-gall./min at
1 PSI.g pressure drop)
Ø
Valve Size I-II III-I
C
Cavity Flush
GPM*
C1
K 1
Ø1
Ø
*
C
C1
Ø1
K1
5
3. Mixproof Options
N Without Seat Lift See T_L for Seat Lift Options, page 70
1.5" OD 57 38 2.0
2" OD 104 43 2.0
4. Valve Size
2.5" OD 117 69 2.1
1.5" 2" 2.5" 3" 4"
3" OD 204 103 2.1
5. Actuator Type
C Air/Spring Normally Closed G Manual with Interlock
D
4" OD 407 174 2.1
III
D
GEA Tuchenhagen | 866.531.5629 | www.tuchenhagen.us
68
6. Seal Material
E EPDM V FKM H HNBR Other options available.
Contact GEA Tuchenhagen.
7. Connection Type
T Tri-Clamp B Butt Weld* *Applied to all ports unless otherwise specified.
Other process connections available.
8. Port Orientation Upper to Lower Housings
L0
Clamped
9. Internal Surface Finish
2 30-35 Ra, external matte 4 15-20 Ra, external matte
6 20-25 Ra, external matte 8 15-20 Ra, external polish
T L - N - 2.5 - G - V B - L0 - 8 /50 -
Order Key (Std)
11 12 13 14 15 16
0 0 0 0 0 Z
Add Order Key for Control Module
when required (section 8.3)
1 2 3 4 5 6 7 8 9 10 11 - 16
Valve
Type
Housing
Type
Mixproof
Options
Valve
Size
Actuator
Type
Order key given in short form and will differ from factory-issued documents.
10. Available Special Accessories / Documentation
/E /25 /32 /36 /43 /50 /67 /41 /42 /BP /BPX
See section 8 for description of accessories and 1.1 for documentation.
Seal Connect
Material Type
Port
Orient
Finish
Special
Options
11 - 16. Control Module
(see section 8.3)
Control Module
I
Weights
Valve Size
Dimensions
Valve
Size
lbs.
1.5" OD 35
2" OD 56
2.5" OD 63
3" OD 82
4" OD 123
OD in accordance with ASME-BPE-a-2004, DIN 11866, Row C
Ø Ø1 Øt Øu C C1 D H Kt Ku K1 X Stroke
1.5" OD 1.5 x 0.063 0.91 x 0.059 6.50 3.35 x 0.079 3.54 3.54 4.29 21.46 2.13 2.15 3.31 4.92 0.87
2.0" OD 2 x 0.063 0.91 x 0.059 6.50 3.35 x 0.079 3.54 3.54 4.29 21.73 2.40 2.42 3.54 4.92 1.22
2.5" OD 2.5 x 0.063 1.14 x 0.059 7.87 4.49 x 0.098 3.54 3.54 5.31 22.20 2.87 2.95 3.78 4.92 1.22
3.0" OD 3 x 0.063 1.14 x 0.059 7.87 4.49 x 0.098 4.92 3.54 6.69 24.41 3.15 3.23 4.02 4.92 1.54
4.0" OD 4 x 0.078 1.14 x 0.059 8.86 6.06 x 0.079 4.92 3.54 6.69 24.37 3.62 3.72 4.13 4.92 1.61
X = Clearance required for maintenance
II
Add 1.1" to Dimension C
for Tri-Clamp Connections
* Cavity Cleaning:
Hose connection
for 1" OD
for 1.5" - 4" OD
Ø 6/4 mm
Ø 8/6 mm
Recommended operating pressure
for optimal cleaning efficiency:
36 PSI.g Min., 72 PSI.g Max.
www.tuchenhagen.us | 866.531.5629 | GEA Tuchenhagen
69