VESTA GEA Tuchenhagen Pharmaceutical Brochure - Tri-Canada

Non-Slamming Divert Valve Type X
Non-Slamming Divert Valve Type X
4
GEA Tuchenhagen | 866.531.5629 | www.tuchenhagen.us
52
Order Key
Material: AISI 316L for all wetted parts AL6XN and other high alloys available.
AISI 304L for all non-wetted parts
Contact GEA Tuchenhagen.
Control Air Pressure: Standard 87 PSI.g
Max Holding Pressure: 116 PSI.g (1"), 87 PSI.g (1.5" to 2"), 72 PSI.g (2.5" to 6") using Standard Actuator
Other pressures available – see section 8.2, chart 2a
2. Housing Combinations
K W Y U M X N Z G
3. Stroke Length
R Regular Stroke
4. Valve Size
1" 1.5" 2" 2.5" 3" 4" M: Mix Match – see section 8.4
5. Actuator Type
C Air/Spring Normally Closed O Air/Spring Normally Open A Air/Air
6. Seal Material
E EPDM V FKM H HNBR Other options available.
Contact GEA Tuchenhagen.
7. Connection Type
T Tri-Clamp B Butt Weld* *Applied to all ports unless otherwise specified.
Other process connections available.
8. Port Orientation Upper to Lower Housings
L0 Clamped
V0 Welded Vertical Port
9. Internal Surface Finish
2 30-35 Ra, external matte 4 15-20 Ra, external matte
6 20-25 Ra, external matte 8 15-20 Ra, external polish
X K - R - 2 - C - E T - V0 - 4 /16 -
11 - 16. Control Module
(see section 8.3)
Order Key (Std)
11 12 13 14 15 16
0 0 0 0 0 Z
Add Order Key for Control Module
when required (section 8.3)
1 2 3 4 5 6 7 8 9 10 11 - 16
Valve
Type
Housing
Type
Stroke
Length
Valve
Size
Actuator
Type
Order key given in short form and will differ from factory-issued documents.
10. Available Special Accessories / Documentation
/E /16 /20 /21 /24 /43 /50 /67 /41 /42 /BP /BPX
See section 8 for description of accessories and 1.1 for documentation.
Seal Connect
Material Type
Port
Orient
Finish
Special
Options
Control Module
Cv Values
(flow in US-gall./min at 1 PSI.g pressure drop)
III
V
Valve Size I-II I-III III-I III-V V-III V-VI
1" OD 22 13 13 13 13 30
1.5" OD 75 42 34 34 42 78
2" OD 146 57 53 53 60 165
2.5" OD 236 109 84 83 108 254
I
3" OD 327 113 94 100 111 413
4" OD 712 221 181 172 215 798
Weights
Valve Size
Dimensions
Valve
Size
II
IV
VI
lbs.
1" OD 22
1.5" OD 40
2" OD 40
2.5" OD 55
3" OD 55
4" OD 57
OD in accordance with ASME-BPE-a-2004, DIN 11866, Row C
Ø A P C D H X Stroke
1.0" OD 1 x 0.063 1.81 5.12 3.54 3.86 11.91 7.60 0.28
1.5" OD 1.5 x 0.063 2.32 5.91 3.54 5.31 12.68 7.60 0.63
2.0" OD 2 x 0.063 2.81 6.30 3.54 5.31 12.91 7.60 0.63
2.5" OD 2.5 x 0.063 3.54 8.27 4.92 6.69 14.57 7.60 0.98
3.0" OD 3 x 0.063 4.06 8.86 4.92 6.69 14.93 7.60 0.71
4.0" OD 4 x 0.078 5.02 9.84 4.92 8.27 15.20 7.60 1.06
X and P = Clearance required for maintenance
Add 1.1" to
Dimensions B
and C for Tri-Clamp
Connections*
*GEA Tuchenhagen
recommends at least one
process connection for
maintenance purposes.
A A H
X
Ø
P
D
C
Recommended flow direction to
prevent pressure surges during
the closing operation of the valve.
4
www.tuchenhagen.us | 866.531.5629 | GEA Tuchenhagen
53