VESTA GEA Tuchenhagen Pharmaceutical Brochure - Tri-Canada

CIP Mixproof Valve Type K
CIP Mixproof Valve Type K
Order Key
Material: AISI 316L for all wetted parts AL6XN and other high alloys available.
AISI 304L for all non-wetted parts
Contact GEA Tuchenhagen.
Control Air Pressure: Standard 87 PSI.g
Max Holding Pressure: 116 PSI.g (1"), 87 PSI.g (1.5" to 2"), 72 PSI.g (2.5" to 4") using Standard Actuator
Other pressures available – see section 8.2, chart 2
Cv Values
(flow in US-gall./min at 1 PSI.g pressure drop)
Valve Size I-II I-III III-I III-IV
1" OD 30 16 16
1.5" OD 75 36 29 92
X
5
2. Housing Combinations
2" OD 144 54 41 137
2.5" OD 212 112 73 225
5
3" OD 324 127 113 510
L
T
B
C
A
E
4" OD 669 251 141 736
3. Mixproof Options
N
Without Seat Lift
D
GEA Tuchenhagen | 866.531.5629 | www.tuchenhagen.us
80
4. Valve Size
1" 1.5" 2" 2.5" 3" 4" M: Mix Match – see section 8.4
5. Actuator Type
C Air/Spring Normally Closed G With Manual Interlock
6. Seal Material
E EPDM V FKM H HNBR Other options available.
Contact GEA Tuchenhagen.
7. Connection Type
T Tri-Clamp B Butt Weld* *Applied to all ports unless otherwise specified.
Other process connections available.
8. Port Orientation Upper to Lower Housings
L0 Clamped
VI 0°
V2 0°
V3 0°
V0 Welded Vertical Port
9. Internal Surface Finish
2 32 30-35 Ra, Ra, external matte matte 4 15-20 Ra, external matte
6 20-25 Ra, external matte 8 15-20 Ra, external polish
K L - N - 2 - G - E T - V0 - 3 /67 -
Order Key (Std)
11 12 13 14 15 16
0 0 0 0 0 Z
Add Order Key for Control Module
when required (section 8.3)
1 2 3 4 5 6 7 8 9 10 11 - 16
Valve
Type
Housing
Type
Mixproof
Options
Valve
Size
Actuator
Type
Order key given in short form and will differ from factory-issued documents.
Seal Connect
Material Type
Port
Orient
Finish
90°
Special
Options
180°
270°
Control Module
upper
housing
lower
housing
10. Available Special Accessories / Documentation
/E /12 /16 /25 /43 /50 /67 /K1 /K2 /41 /42 /BP /BPX
See section 8 for description of accessories and 1.1 for documentation.
11 - 16. Control Module
(see section 8.3)
I
III
Weights
Valve Size
lbs.
1" OD 22
1.5" OD 25
2" OD 25
2.5" OD 35
3" OD 51
4" OD 53
Dimensions
Valve
Size
B
A H
Ø
OD in accordance with ASME-BPE-a-2004, DIN 11866, Row C
x A B C D H X Stroke
1.0" OD 1 x 0.063 1.81 2.20 3.54 3.86 16.57 7.60 0.63
1.5" OD 1.5 x 0.063 2.32 2.48 3.54 4.29 18.35 7.60 0.98
2.0" OD 2 x 0.063 2.81 2.72 3.54 4.29 18.58 7.60 1.18
2.5" OD 2.5 x 0.063 3.54 3.15 4.92 5.31 19.09 7.60 1.18
3.0" OD 3 x 0.063 4.06 3.43 4.92 5.31 19.37 7.60 1.14
4.0" OD 4 x 0.078 5.02 3.90 4.92 6.69 20.87 7.60 1.18
X = Clearance required for maintenance
II
IV
C
*
Recommended flow direction to
prevent pressure surges during
the closing operation of the valve.
* Leakage outlet pipe
Ø 16 mm and 1.5 mm wall
thickness, 90° bent (standard).
Optional straight (accessory /K2).
www.tuchenhagen.us | 866.531.5629 | GEA Tuchenhagen
81