ER-A Model - MS Cash Drawer
ER-A Model - MS Cash Drawer
ER-A Model - MS Cash Drawer
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>ER</strong>-A <strong>Model</strong>s PGM/PGM1/PGM2 Mode Overview<br />
<strong>ER</strong>-A410/420, 440, 450T & 520/530 PGM1/PGM2 Mode Programming<br />
The <strong>ER</strong>-A410/420, 440, 450T & 520/530 generally consists of two types of programming that are<br />
managed by the mode key.<br />
NOTE:<br />
1. PGM2-Mode Programming: PGM Jobs that are 2xxx<br />
2. PGM1-Mode Programming: PGM Jobs that are 1xxx<br />
1. PGM1 Job Codes (1xxx) may be performed in PGM1 or PGM2 Mode.<br />
2. PGM2 Jobs Codes (2xxx) may only be performed in PGM2 Mode.<br />
PGM2-Mode programming is primarily used when installing the ECR, and for maintaining select presets<br />
intended for Managers/ Owners only.<br />
The PGM1-Mode Programming is intended for settings that change frequently.<br />
<strong>ER</strong>-A320, 330, 410/420, 440, 450T & 520/530 Job Code Based<br />
Programming - varies by model<br />
For the <strong>ER</strong>-A320, 330, 410/420, 440, 450T & 520/530 models, the following key operation is used for<br />
PGM/PGM1/PGM2 Job Code based programming. Please see the respective model Programming and<br />
Instruction Manuals, and/or Dealer Knowledge Book for detailed procedures.<br />
NOTE: See the Appendix for a detailed chart of the <strong>ER</strong>-A320, 330, 410/420, 440, 450T, and <strong>ER</strong>-A520/530<br />
PGM Job Codes.<br />
General Rule:<br />
When making PGM/PGM1/PGM2 entries, the following rules apply:<br />
1. If an error occurs prior to completing the 1 st valid entry, it is necessary to depress the [CL] key<br />
and start the PGM Job # again from the beginning.<br />
2. If an error occurs on the second and subsequent preset entries, then depress the [CL] key and reenter<br />
the desired values.<br />
4 OF 9<br />
Page 69 of 108