1-2066FA INSTALL INSTRUCTIONS - Classic Auto Air
1-2066FA INSTALL INSTRUCTIONS - Classic Auto Air
1-2066FA INSTALL INSTRUCTIONS - Classic Auto Air
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
PAGE<br />
19<br />
THESE ARE THE PARTS YOU WILL FIND IN BAG KIT D<br />
You will use all of these parts and hardware during the next series of installation steps.<br />
The ECU will be in it’s own box, within this bag kit.<br />
WATER VALVE<br />
CONTROL<br />
POWER<br />
FACE/FLOOR<br />
DEFROST<br />
Two #10 - 16 x 3/4" Tek Screws<br />
Pressure Switch<br />
(engine compartment)<br />
Yellow<br />
Ground<br />
Ground<br />
Ground<br />
Orange<br />
ECU<br />
Blue<br />
Thermostat<br />
OEM Power<br />
Supply<br />
Fan<br />
Plug<br />
Wire Harness -<br />
Power Supply<br />
Blower Switch<br />
Connection<br />
Wire Harness System<br />
Relay<br />
Illustrations NOT shown actual size<br />
www.classicautoair.com • 866.435.7801