1-2066FA INSTALL INSTRUCTIONS - Classic Auto Air

More documents

Recommendations

Info

PAGE 34 STEP TEN: Connecting the wires from the pressure switch will be done as follows, connect one wire to the connection on the compressor, and the other wire will be routed along with the liquid hose and connected to the blue lead you left unconnected during the interior installation. We’ve included a bullet and slice connector to make these connections, use a crimp tool to secure these properly. You must run the white switch wire thru the firewall and connect to the blue wire from the main harness. FINAL STEPS: You can now complete this portion of the installation by reinstalling any of the exterior components you removed. Take a look around at your installation and check all fitting and bolts for tightness, check the heater hose clamps for tightness, and make sure nothing is routed in a way to obstruct any moving parts. You can refill the radiator and reconnect the battery at this time. WAY TO GO! You’ve just completed the installation of your new A/C system. The final step is to fully charge and test your new system. On the next page you’ll find specifications for proper final preparation for your A/C technician. www.classicautoair.com • 866.435.7801
PAGE 35 www.classicautoair.com • 866.435.7801
Page 1 and 2: Installation Manual 1968-1970 MOPAR
Page 3 and 4: PAGE 3 You have just purchased the
Page 5 and 6: PAGE 5 A Basic Overview of Automoti
Page 7 and 8: PAGE 7 Remove Glove box, Glovebox d
Page 9 and 10: PAGE 9 THESE ARE THE PARTS YOU WILL
Page 11 and 12: PAGE 11 THESE ARE THE PARTS YOU WIL
Page 13 and 14: PAGE 13 A FIGURE 7 Locate the fresh
Page 15 and 16: PAGE 15 We’ve included a new unde
Page 17 and 18: PAGE 17 In Bag Kit C you’ll find
Page 21 and 22: PAGE 21 Wiring Diagram/Overview To
Page 23 and 24: PAGE 23 Temporarily reconnect the c
Page 25 and 26: PAGE 25 Bag Kit E: The following st
Page 27 and 28: PAGE 27 LOUVER FLEX HOSE ROUTE CENT
Page 31 and 32: PAGE 31 STEP FIVE: You can perform
Page 33: PAGE 33 STEP NINE: CONNECTING THE H
Page 37 and 38: PAGE 37 TEST CONDITIONS USED TO DET
Page 39: THIS TEMPLATE IS USED FROM THE INSI

1-2066FA INSTALL INSTRUCTIONS - Classic Auto Air

Create successful ePaper yourself

Delete template?

Save as template?