You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Push<br />
Read<br />
Plugging in the International Power Pak to the MP3000<br />
The Mini-DIN plug on the Power Pak has 4 pins inside a<br />
circular connector. The plug has a locator pin and only plugs<br />
in one way. Rotate the plug unit it fits the POWER ADAPTER<br />
input jack and plug it completely in. Make sure the AC Cord is<br />
in the other end of the Power Pak and the unit is plugged into<br />
a live AC socket. After you plug in the DIN connector. Turn on<br />
the INTERNAL POWER swtich and turn the MP3000 around so<br />
you can see the front. Confirm that the Green PWR Led is ON.<br />
It should turn on and off when the INTERNAL POWER Switch<br />
is turned ON/OFF<br />
MP3000 Setup<br />
Plug-in for<br />
UNIVERSAL POWER PAK<br />
UBOB II<br />
Technology<br />
POWER ADAPTER<br />
Common<br />
+12 VDC +5 VDC<br />
1 5<br />
PORT2 PASSTHROUGH<br />
(NO CONNECTION)<br />
AXIS I/O Out<br />
ON<br />
OFF<br />
INTERNAL<br />
POWER<br />
6 9<br />
SERIES E<br />
SERIAL PASSTHROUGH<br />
to<br />
ESP CONTROLLER<br />
to<br />
MTA100/ESP<br />
MP3000<br />
Multi-Axis Interface<br />
EXPANSION<br />
MODULE<br />
TEST<br />
DTHC / SPS<br />
PORT2 OPTION<br />
INPUT<br />
Isolated Table I/O<br />
1 5<br />
6 9<br />
Multi-Axis Interface<br />
SERIES E<br />
Hand Controller<br />
UBOB II<br />
Technology<br />
Port1 INPUT<br />
To PC<br />
CP PWR<br />
SERIAL INPUT<br />
To PC<br />
PWR should be on when rear<br />
Switch is ON. CP lamp DOES<br />
not light until MACH is<br />
connected to PC and MACH is<br />
out of RESET